Supply Baosteel FT37 mold steel, what material is FT37, factory direct sales

规格：

齐全

价格：

合理

质量：

100%正品

>Material Characteristics
< r> >
: : R>Steel is a low-alloy cold work die steel of domestic tool steel. This steel has certain hardenability and wear resistance, small quenching deformation, uniform carbide distribution and fine particles. This steel has good plasticity and toughness, and its wear resistance is relatively low compared to
>r
: : R> steel. The mold cavity tends to shrink after oil-cooling quenching, the flat surface is easy to bulge, and the warpage tendency is prominent. After graded quenching, the inner hole of the mold cavity tends to expand, but the warpage tendency is significantly reduced. Oil-cooled hardening diameter
>
: : R>～
>
: : R>.
< r>: : R>Supply status
< r>: : R>Specifications are: module
>
: : R>～
>< br/>: : : R>Forgings
>
: : R>～
>
: : R>Flat steel
>
: : : R>～
>
: : R>
>
: : R>～
>
: : : R>, the length is supplied according to customer requirements .
< r>: : R>annealed state, hardness
>
: : R>～
>B
: : R> or
>B
: : R>.
< r>: : R>Reference the corresponding grade
< r>: : R>China
>B
: : R>Standard grade
>r
: : R>, Taiwan, China
>
: : R>Standard grade
>
: : R>, Germany Saister
>
: : R>Standard grade
>
: : R>, Germany
>
: : : R>Standard grade
>r
: : R>, Germany
>
: : R>Standard material number
>.
: : R>, Sweden
>
: : R>standard Brand
>R
: : R>, Swedish ASSAB standard brand
>
: : R>, Sweden
>
: : : R >Standard grades
>
: : R>, Japan
>
: : R>Standard grades
>
: : R>, Japan Datong (
>
: : R>) Standard grade
>
: : R>, Korea
>
: : : R>Standard grade
>
: : R>, United States
>
: : R> standard grade
>
: : R>, International Organization for Standardization (
>
: : R>) Standard grade
>r
: : R>, France
>
: : : R>Standard grade
>r< br/>: : R>, Russia:>гост
Standard grade
>B
: : R>г, United Kingdom
>B
: : : R> Standard grade
>B
: : R>.
< r>: : R>Critical point temperature (approximate value)
< r> >
: : R>℃,
>< b>
: : R>℃,
>r
: : R>℃,
>
: : R>℃.
< r>: : R>Annealing specification
< r>: : R>Annealing temperature
>
: : R>～
>
: : : R>℃, cooled to
>
: at a cooling rate of
>
: : R>℃
>
: : R> R>℃, air cooling after coming out of the oven.
< r>: : R>Quenching and tempering specifications
< r>: : R>Quenching temperature
>
: : R>～
>
: : : R>℃, hot oil or hot bath cooling, hardness
>
: : R>.
< r>: : R>Tempering temperature
>
: : R>～
>
: : : R>℃
>
: : R>℃
>
: : R>℃, hardness
>
: : R>.
< r>: : R>Typical application examples
< r> >
: : R>) Used for making punching, punching, trimming dies, bending, deep drawing, rolling When using edges, the hardness used is
>
: : R>～
>
: : R>.
< r> >
: : R>) It is used to make cold punching dies with small cross-sections and complex shapes, as well as sheet stamping dies, jewelry embossing, etc.
< r> >
: : R>) When used to make guide posts and guide sleeves, the hardness used is
>
: : R>~
>< br/>: : R>.
< r> >
: : R>) is widely used to make punching dies, stamping dies, bending dies and finishing dies with thickness
>
: : R>.
< r> >
: : R>) is widely used in making mold bushings, ejector pins, etc.
< r> >
: : R>Price,
>
: : R>What material is it?
>
: : R>Price,
>r
: : R>Material,
>
: : What material is R>,
>
: : R>Mold steel
/>