Mobile welding fume dust collector

型号：

YC-06

风量：

800

除尘率：

99.5

The mobile welding smoke dust collector is an air purification device designed to treat welding smoke and industrial waste gas dust. Its structure consists of a universal vacuum tube, a high-efficiency coated dust filter element, an activated carbon filter, a special low-noise centrifugal fan and a touch-type A complete air purification system composed of microcomputer controller, etc. The combination of different filter functions can be adapted to air purification in different places. This smoke purifier and welding smoke dust collector has a reasonable structure, is easy to operate, and is flexible to use. The universal vacuum tube can be lifted up and down, and moved left and right. With the movable box, it can be fixed in any direction, allowing the dust collection hood to be directly extended to the smoke. Effectively absorb and treat smoke and dust near the source. Widely used in machinery, hardware, electricity, electronics, optoelectronics, chemical industry, tobacco, pharmaceutical, food, biology and other industries and other places with smoke and dust pollution. The working principle of the mobile welding smoke dust collector: The smoke exhaust gas is sucked into the settling chamber inside the purifier (dust collector) box by the negative pressure of the fan through the dust suction pipe. Using gravity and upward airflow, the coarse particles of smoke fall into the bottom dust collector. Particulate smoke and dust are captured on the outer surface of the membrane-coated filter element, and harmful gases are removed by the activated carbon filter. The clean gas is decomposed and purified through multi-layer filtration and then discharged from the air outlet.
Features of the mobile welding fume dust collector:
) It adopts a movable universal vacuum tube, which can adjust the suction position up and down, left and right, and effectively remove the fume from the source.
) Integrated high-efficiency polyester film-coated dust removal filter element, sub-micron smoke filtration, filtration efficiency of smoke and dust (.) can reach more than .%, high filtration efficiency and long service life.
) Corresponding filter media can be selected according to the properties of the smoke to meet the purification treatment of smoke of different properties. For example, activated carbon filtration is used for chemical smoke and dust, and electrostatic adsorption filtration is used for anti-static requirements.
) Compact structure, light volume, flexible movement, and easy cleaning and replacement of the filter element. In addition, the box structure can also be customized.
) Equipped with a high-performance and low-noise special centrifugal fan, with large air suction volume and low operating noise.
) It adopts touch-type microcomputer control operation panel, the circuit is clear and simple, and the performance is reliable