tesa double sided tape

tesa：

1030mm*50m

Classification of double-sided tape: According to characteristics, it is divided into double-sided tape and single-sided tape. According to base material: non-woven base material double-sided tape (composed of non-woven base material double-sided coated with acrylic glue): such as, Double-sided adhesive tape for base materials (composed of acrylic glue coated on both sides of the base material) such as Such as, etc. Electrical insulation tape: Such as, etc. How to choose double-sided tape? Double-sided tape should be selected according to the product and environmental requirements of the application. You can refer to the following instructions: , Non-woven substrate double-sided adhesive has good adhesion and processability , generally long-term temperature resistance ℃, short-term temperature resistance ℃, the thickness is generally , suitable for nameplates, plastic lamination, automobiles, mobile phones, electrical appliances, sponges, rubber, signs, paper products, toys and other industries, home appliances and electronic instruments Parts assembly, display lens. , double-sided adhesive tape for the base material has excellent adhesion effect to prevent falling off, good processability, short-term temperature resistance ℃, long-term temperature resistance ℃, the thickness is generally., suitable for fixing molds and decorative parts in the furniture industry and in the electronics industry Fixation of load-bearing parts. , double-sided adhesive tape as a base material has good temperature resistance and strong shear resistance. It is generally resistant to long-term temperature ℃ and short-term temperature ℃. The thickness is generally 1,000 ℃ and is suitable for the bonding of nameplates, decorations and decorative parts. , the hot melt adhesive film has good consistency, uniform bonding thickness, does not contain solvents, is easy to process, and has good adhesion to many objects. The thickness is ., the color is translucent amber, and the hot melt softening temperature is ℃ . It is suitable for bonding nameplates, plastics, and hardware. It can also achieve good results on uneven surfaces. It is recommended that the initial bonding conditions are: temperature ℃, bonding time seconds, and pressure of pounds square inches. Requirements for the use of double-sided tape and storage environment requirements. When bonding double-sided tape, you need to operate it in the following ways to obtain an enhanced bonding effect: First, the adhesive surface must be cleaned and dried. It is generally recommended to use a cloth to pick it up: After wiping the surface with a mixture of (isopropyl alcohol) and water, wait until the surface is completely dry. . After the cleaning solvent dries, attach the tape to the adhesive surface and apply about (.kg square centimeter) pressure with a roller or other means to make it adhere effectively. 1. Tear off the tape release paper, then attach the material to be bonded, and apply pressure to make it fit effectively. If you need to remove air bubbles, increase the pressure to the limit that the item can withstand. , The ideal temperature when pasting is ℃, not lower than ℃. When bonding tape, one end should be attached first and then slowly pressed to the other end to reduce the chance of bubbles. Suitable environmental requirements for double-sided tape storage: temperature is ℃ and humidity is .