Pneumatic oil pump

输出油压(MPa)：

0.35

耗气量(L/S)：

压缩空气0.7MPa时80-90

油箱容积(L)：

13

Product Introduction/Pneumatic oil pump is an ideal device for providing high-pressure oil power to the jack. The key technology of this product is the advanced foreign technology that uses a combination of cycloid pump and plunger pump to supply oil. The advantages of this product are as follows: The large-displacement cycloid pump and plunger pump supply oil to the machine tool at the same time, which greatly improves the working efficiency of the tensioning machine tool. Improve
The air motor has a compact structure and directly drives the cycloidal rotor pump and plunger pump on the same shaft. High-pressure oil enters the actuator through the manual reversing valve. Therefore, it is small in size and light in weight. It is easy to operate. Instantaneous start and control, infinitely variable speed, and can carry load. Starting
Low failure rate will not cause failure due to overload. When the overload is removed, it can resume normal operation without power
Main performance parameters of the whole machine
Product model
Output oil pressure
Output oil volume
Air pressure
Outlet pressure
Air consumption
When compressing air
Oil tank volume
Host weight