Changsha small roller manufacturer reminds you to beware of counterfeit 2015yt0916

Changsha small roller
manufacturers remind you to beware of counterfeit products. Changsha is the political, economic, cultural and transportation center of Hunan Province. The entertainment industry is very developed and is known as the entertainment capital of mainland China. Changsha is located in the north-eastern part of Hunan Province, south of the Yangtze River in south-central China. It is located in the transition zone from the southern end of the Dongting Lake Plain to the hilly basin in central Hunan. As early as the Spring and Autumn Period, Changsha was one of the strategic locations of the Chu Kingdom in the south. After the founding of the Han Dynasty, Liu Bang changed Linxiang to Changsha in BC and established the Changsha Kingdom as a vassal state of the Han Dynasty.
Shandong Jining Kete Engineering Machinery Manufacturing Company
Landline
Contact Manager Yuan
Postal code
Address No. Huoju South Road, Jining Development Zone
Mobile phone
Products for sale
Small rollers
Small ride-on rollers, hand-held rollers, vibratory rollers, etc.
Small rollers
Small walk-behind rollers
Keywords soil compactor, small vibratory roller, backfill compactor, trench compactor, etc., walk-behind single-wheel roller, walk-behind vibratory roller, small vibratory roller
Walk-behind roller, single drum roller, small walk-behind roller | Roller model | | Small roller
Price | Roller manufacturer | Honda gasoline engine roller Shandong small vibratory roller Walk-behind single-wheel vibratory roller Trench compactor Or the walk-behind trench compactor Shandong Jining trench compactor/walk-behind trench compactor has low price
The product has the lowest price of three guarantees and is shipped on the same day
Check the lubricating oil, fuel and Whether the water is sufficient, check whether there are cracks and leaks in the pipelines and joints of each system, whether each instrument is normal, whether the roller scraper is flat and good, whether the bolts at each connection are loose, and only after confirming that they are normal can work.
Before starting the road roller, you must pay attention to whether there are any obstacles or personnel in front of and behind the machine. Repairs must not be carried out while the roller is in operation.
When the roller is moving forward and needs to change direction and retreat, wait until the roller stops before pulling the reversing lever. It is strictly forbidden to use the reversing clutch as a brake for the roller.
When rolling on a newly opened road, it should be rolled from the middle to both sides. The last rolling edge should be more than half a meter away from the edge of the roadbed. When building a road in a mountainous area, it must be rolled from the inside to the outside. When rolling the second row, the length of the rollers must be overlapped by half a meter or more from the edge of the roadbed. The distance between two rolling mills should be kept at least
meters
. Shifting and coasting are not allowed when going up or downhill.
The vibration of the road roller must be started after the roller is traveling and the vibration must be stopped before the roller is stopped. The roller is strictly prohibited from vibrating when traveling on hard roads. The roller must not use fast gear when making sharp turns. It is strictly prohibited to adjust the vibration frequency before vibration starts. The engine must be turned off when adjusting drum amplitude.
After the operation is completed, the roller should be parked on a flat and solid site and the brake should be applied. Signal lights should be hung next to parking opportunities along traffic lanes at night.
During winter construction in severe cold areas, when the machine is shut down overnight, the rollers must be lifted off the ground with wooden boards.
Walk-behind single-wheel roller

Speed

Theoretical gradeability
Vibration frequency
Excitation force
Water tank volume< br/> Drive pressure transmission unit
Vibrating mechanical transmission automatic centrifugal clutch
Fuel tank volume
Fuel consumption
Drum wheel width
Drum wheel diameter
Overall width
Working weight
Maximum working weight
Precautions
When changing the forward and backward directions of the roller, the rollers should stop rotating before going uphill. When changing speed, it should be done after braking. Do not slide out of gear when going downhill to ensure the safety of personnel. If it is necessary for two machines to work at the same time, the distance between the front and rear should be kept above and they are not allowed to run side by side on the slope to prevent collisions. At the same time, when the machine weight needs to be increased according to the operating environment, yellow sand or water can be added to the rollers to increase the machine weight. In winter, water should not be used to increase the weight to prevent the rollers from frost heaving and cracking.
The gearbox of the small ride-on road roller produced by Shandong Kete Engineering Machinery is located on the left side of the rear frame. It includes three parts: a transmission mechanism, a reversing mechanism and a brake, so that the roller can achieve three different speeds in forward and reverse gears and realize the original machine driving brake and parking brake.
Our company's products are strictly quality controlled and screened at all levels. Of course, you can also come directly to our factory for on-site testing. We promise that if you are not satisfied at all, we will definitely modify and update it according to your opinions.
Shandong Jining Kete Engineering Machinery Manufacturing Company
Landline
Contact Manager Yuan
Postal code
Address No. Huoju South Road, Jining Development Zone
Mobile phone
Products for sale
Small rollers
Small ride-on rollers, hand-held rollers, vibratory rollers, etc.
Small roller
Small walk-behind roller