5182 anti-rust aluminum plate latest price retail 5182 aluminum alloy performance

Anti-rust aluminum catalog
Standard: B/-Overview
Characteristics
The aluminum plate is rust-proof aluminum. The performance of the aluminum plate is similar to the aluminum plate, but the magnesium content is slightly higher and a small amount is added. Silicon, so the weldability ratio is better. The welding properties of aluminum plates using gas welding, argon arc welding, spot welding and seam welding are all very good, and there is no big difference between the two in other properties. []
① It belongs to the - series alloy and has a wide range of uses. In particular, the construction industry cannot do without this alloy. It is the most promising alloy. It has good corrosion resistance, excellent weldability, good cold workability, and has medium strength. The main alloy element is magnesium, which has good formability, corrosion resistance, weldability, and medium strength. It is used to manufacture aircraft fuel tanks, oil pipes, and sheet metal parts of transportation vehicles and ships, instruments, street lamp brackets and rivets, and hardware. products, electrical appliance casings, etc.
Uses
② series alloy is the most widely used anti-rust aluminum. This alloy has high strength, especially fatigue resistance: high plasticity and corrosion resistance, and cannot be strengthened by heat treatment in half. When cold work hardening, the plasticity is still good, but when cold work hardening, the plasticity is low, corrosion resistance is good, weldability is good, machinability is poor, and it can be polished. It is mainly used for low-load parts that require high plasticity and good weldability and work in liquid or gas media, such as mailboxes, gasoline or lubricating oil conduits, various liquid containers and other small-load parts made by deep drawing: Wire is used to make rivets.
Chemical composition
Aluminum balance
Zinc
Chromium
Silicon
Iron.~
Manganese.~
Magnesium.~
Titanium
Copper()
Mechanical properties
Tensile strength:
Conditional yield strength.:
Elongation ():
Note : Mechanical properties of pipes at room temperature
Specimen size: all wall thicknesses
Heat treatment specifications
) Homogenization annealing: heating ~ ℃ insulation ~ air cooling. ) Rapid annealing: Heating at 3~℃ and holding time at 3~air or water cooling. 3) High temperature annealing: When the thickness of the finished product is heated to 3~℃, the holding time is ~3 or~air cooling. ) Low temperature annealing: heating to 3°C and holding time to air cooling.
Status: Aluminum and aluminum alloy drawn (rolled) seamless pipes (status