In stock 15*8 large inflatable slide, steel frame bungee jumping, flying saucer bumper car

:
: Equipment cleaning collection:
. :-- -
:- Cut off the power, open the fan interface and exhaust port, the exhaust time is generally
minutes, and the remaining Qi needs to be squeezed. If water enters the equipment due to rain, be sure to drain the water and dry it for cleaning. You can use washing powder to wipe away stains and oil stains, then scrub it clean with clean water and dry it in the sun. 3
Fold the device, cover the front with the bottom, and cover it with a tarpaulin.
If it will not be used for a long time, fold, bundle and package the clean equipment. The storage temperature is generally between
and
degrees Celsius.
The fan should be protected against moisture and corrosion. Inflatable molding equipment should be protected from rodent and insect bites.
..瀹嬩綋- :-
:-- -
:-- -Maintenance methods:
. :-- -
:- In order to ensure your The device has reached its normal service life and cannot be used by too many children when it is turned on and played. Generally, one child can be accommodated on the inflatable mold.
The small shapes on the facilities are for decoration, and children should not be allowed to pull or tear them hard to avoid damage. 3
When children are playing, do not allow them to use hard objects to scribble on the equipment to avoid damage.
If the equipment is damaged, apply special glue on both the damaged area and the spare
materials. After the glue
does not stick to your hands for a few minutes, glue them together, squeeze them appropriately, and count. Ready to use in minutes.
The air pressure on the equipment is too soft. Check whether there is excessive air leakage or tearing holes. If the air pressure is too hard during a power outage, cover the air inlet of the fan a little.
If a large area is damaged due to abnormal use, the factory can provide professional repair services, or send it directly back to the factory
..瀹嬩綋- :--