Supply embossed floor

, (Welcome to contact Manager Weng:)
. ' , Embossed floor
. ' , 1. What is embossed floor?
Cement embossed floor is also called art floor. Embossed floor is a floor material with strong artistic quality and special decorative requirements. It is a ready-to-use high-strength and wear-resistant floor material containing special mineral aggregates, inorganic pigments and additives. Its advantages
. ' are easy construction, one-time molding, long service life, fast construction, easy repair and not easy to fade, etc. At the same time, it makes up for the poor integrity, unevenness, easy loosening and use of ordinary colored floor tiles. Short cycle and other shortcomings.
. ' ,
2. Characteristics of embossed floors:
Cement embossed floors are also called embossed and artistic embossed floors. It has the advantages of beautiful appearance, non-fading, solid texture, high strength, corrosion resistance, anti-freeze, fireproof and non-toxic, not easy to be damaged, and convenient paving.
. ' ,
3. Scope of application of cement embossed floor:
Can be widely used in villas, apartments, resorts, bars, cafes, hotels, cultural and entertainment venues, golf courses , commercial plazas, outdoor parking lots, gardens, courtyards, living rooms and other indoor and outdoor concrete floors.
. ' , 4. Construction steps of cement embossed floor
. Concrete surface roughening treatment: add cement slurry before the initial setting of the concrete surface. Use a manual iron plate to evenly smooth the water mortar on the concrete surface and level it. Brushed surface.
.Spread hardening material: Spread the specified amount of /3 hardener stamping floor evenly on the concrete surface in the initial setting stage. After the hardening material absorbs water and is moistened, use a manual iron plate to level and polish it to complete the first operation. , wait until the hardened material has initially set to a certain stage, and then carry out the second/3 material spreading, finishing and leveling operation.
3. Leveling, finishing and hardening materials: According to the hardening conditions of the concrete, perform at least three manual iron plate finishing and leveling
. ' operations, and the finishing operations should be staggered with each other.
.Spread release powder: When the hardened material is initially set at a certain stage and the surface is dry and has no obvious moisture, evenly spread a layer of release powder that matches the hardened material.
. Use a mold to press the pattern and keep the mold fixed and flat. The pressed pattern must be formed in one go and cannot be pressed repeatedly.
. ' , .Achieve various design styles, textures and colors.
. ' , embossed floor embossed floor embossed floor