Special LED energy-saving lamps for cold storage

Cold storage

Energy-saving special lamps
●
Characteristics of traditional cold storage lamps:
Most of the traditional lamps used in cold storage use incandescent lamps, fluorescent lamps, etc., which consume high energy and require wicks to work The temperature must be above 0 degrees to achieve high luminous flux output. In a low-temperature environment, the temperature of the filament and wick cannot meet this condition, resulting in slow startup, low brightness, and short life. Frequent startup can also cause the bulb to burst at subzero degrees. It is difficult to light in such a low temperature environment, and it is extremely difficult to light fluorescent lamps that cannot work properly. Due to the large temperature difference between the inside and outside of traditional cold storage lamps, the glass cover of the bulb will become increasingly brittle and easily broken by a touch. It is not only troublesome to replace frequently, but also very unsafe.
●

Significant advantages of special energy-saving lamps for cold storage:
The shell is made of aluminum alloy, which has good heat dissipation, beautiful appearance, lightweight size, flexible opening, safe and reliable use, And it has the characteristics of insulation, flame retardant, impact resistance, anti-corrosion, etc.
The light-transmitting cover is made of low-temperature resistant materials. Based on the original product formula, new, low-temperature plasticizers and anti-aging agents are introduced to reduce It solves the problems of hardness, brittleness and easy breakage at low temperatures, and has the characteristics of impact resistance and high light transmittance
3. Long life: the lamp body is a heat dissipation overall structure with beautiful appearance and can effectively reduce the working temperature of the lamp to the optimal level. point. The life of the lamp can reach more than 20,000 hours
. High efficiency and energy saving: Compared with incandescent lamps and ordinary fluorescent lamps, it saves up to 100% energy, and compared with energy-saving lamps, it saves more energy
. Short response time: it can be started instantly and the response time is , Frequent switching does not affect the service life, and it can also be started instantly
. Environmentally friendly and pollution-free: All materials used are produced from environmentally friendly and pollution-free recyclable materials, and do not contain toxic and harmful substances such as mercury and lead
. Explosion-proof: No The lamp body may break or explode. The entire lamp body structure adopts a safe design and is not easily damaged
. Standard lamp mouth: The lamp mouth structure is easy to replace. Users with new or old installations can use the lamp directly
. Strong weather resistance: It can work stably in the range of sub-zero degrees, completely solving the problem of cold storage lighting
. Using Taiwan SMD wick, the luminous flux is large and the light attenuation is small.
Advantages of lamps:
Energy-saving
Low power consumption, energy-saving. The power consumption of fluorescent lamps is one-tenth of traditional fluorescent lamps and one-quarter of energy-saving lamps. .
Environmental protection

Environmental protection lamps, protect the earth. Traditional fluorescent lamps contain a large amount of mercury. If the mercury is broken, it will volatilize into the atmosphere, seriously polluting the air and water resources. It is a green and environmentally friendly light source that does not contain mercury.
Long lifespan
Long-term use without replacement. The lifespan is twice that of traditional fluorescent lamps. It can be used for a long time without replacement, reducing labor costs. It can be said to be a once and for all solution to ordinary household lighting, and is more suitable for occasions that are difficult to replace.
Less heat generation
Efficient conversion to reduce heat generation. Traditional lamps produce a large amount of heat energy, while lamps convert all electrical energy into light energy without causing any waste of energy. Moreover, documents and clothing will not fade.
Safe

Sturdy and reliable, with good vibration resistance. The lamp body itself is made of epoxy resin instead of traditional glass, so there is no hidden danger of breakage of traditional lamps. Even if it hits the floor, it will not be easily damaged and can be used with confidence. It has good earthquake resistance and is easy to transport.
No stroboscopic light
Soft light, eye protection. Traditional fluorescent lamps use alternating current, so they will produce a stroboscopic light every second. The lamp directly converts alternating current into direct current, which does not cause flickering and protects the eyes.
Noiseless
Quiet and comfortable, no noise lamps will not produce noise, making them a good choice for situations where precision electronic instruments are used. Suitable for libraries, offices and other places.
No ultraviolet light
No ultraviolet light, no mosquitoes The lamp will not produce ultraviolet light, so there will not be many mosquitoes surrounding the light source like traditional lamps. The interior will become cleaner, more hygienic and tidier.
Standard lamp holder
Universal lamp holder, directly replaces the universal standard lamp holder (, R,), and can directly replace existing halogen lamps, incandescent lamps, and fluorescent lamps.
Light distribution technology
Light distribution technology, sublimation effect light distribution technology expands point light sources into surface light sources, increases the luminous surface, eliminates glare, sublimates visual effects, and eliminates visual fatigue.
Good color rendering
Multiple color temperatures, good color rendering, luminous efficiency can be as high as /, multiple color temperatures are available, high color rendering index, good color rendering.
Fashionable and popular
Fashionable and popular, following the trend, product design fully embodies the spirit of the trend, with a fashionable, elegant appearance and creative styles.