Year1
Contact person: Manager Zhang
Address: Jinzhou City, Liaoning Province Songpo Road, Linghe District
Office:
Fax:
Customer consultation:
Technical service:
- Striving to create the industry-leading brand Jinzhou Shuangxing
- Hydraulic tamping machine-Shuangxing Railway
type hydraulic tamping machine is an updated product developed by our factory based on the experience of domestic and foreign users in the use of tamping machines and using new materials and new technologies. Its basic structure and principle still retain the advantages of the old tamping machine, namely the double guide column frame and single cylinder lifting method. At the same time, by increasing the insertion depth of the pick and using methods such as increasing the guide column stroke limiter, it can not only perform tamping operations on domestic Type II and Type III concrete sleeper lines, but also can be used on various foreign concrete sleepers. Carry out tamping operations on the lines with steel sleepers. The main technical performance is higher than that of the old tamping machine. This machine is suitable for tamping different types of rails and concrete sleeper lines after large and medium maintenance and cleaning operations, and is also suitable for tamping ballast on the track bed of new lines. This machine has superior performance, reasonable structure, safety and reliability, and high operating efficiency, which fully meets the needs of railway ballast tamping operations.
This machine can be equipped with different power sources according to the actual needs of the user: gasoline engine, air-cooled diesel engine
- Hydraulic tamping machine-Shuangxing Railway
Power:
Honda gasoline engine
Rated power
Speed in rpm
Diesel engine
Power
Speed in rpm
, hydraulic system working pressure ~
, vibration Frequency~
, excitation force:
, maximum insertion force
, clamping strength
, insertion depth (below the sleeper bottom)
, production efficiency root/( group hours)
, Net weight of main machine:
Gasoline engine:
, Dimensions:
Gasoline engine:
Upper rack of tamping machine
Lower rack of tamping machine
, Operation mode:
Two units are used as a set of two unilateral underpasses, suitable for areas with wide shoulders of double lines or single lines.
Two platforms on both sides of the underpass form a group, which is suitable for areas with narrow shoulders on single lines.
, traveling frame track gauge: (special needs must be stated when picking up goods)
-Hydraulic tamping machine-Shuangxing Railway
Working principle: The hydraulic tamping machine is based on an electric motor, or a diesel engine or a gasoline engine As power, the oil pump and vibration shaft are driven respectively through the V-belt. The eccentric body rotating at high speed with the vibration shaft generates an exciting force due to centrifugal force, and the high-pressure oil output by the oil pump enters the lifting cylinder and clamping cylinder through the reversing valve, thereby driving each execution component to achieve rail clamping, downward insertion, and clamping. Wait for the tamping operation function.
Basic structure of the appearance:
, beam, lift cylinder reversing valve control handle, multi-way reversing valve, oil tank, vibrating frame,
, tamping plate,, rail clamping clamp, safety pin, Underframe, engine, hand oil pump, 3 clamps of solid oil, synchronization rod, large latch
-Hydraulic tamping machine-Shuangxing Railway
, maintenance
Daily maintenance
Daily Carry out after work, the instructions are as follows:
) Wipe off dust and oil
) Tighten all fasteners
) Eliminate oil leaks
Regular maintenance
Once an hour , the specific content is as follows:
) Check or replace the nylon sleeve of the tamping pick, and clamp the nylon sleeve of the cylinder lug
) Weld and repair the pick palm to restore it to the original design size
) Filter or replace the hydraulic oil , clean the hydraulic cylinder, oil tank, oil filter, and oil pipe
) Replace failed fasteners
) Re-adjust the oil pressure to.~
) Eliminate oil leaks and replace bad seals
br/> )Check and replace rail clamps
)Check electrical insulation status and motor performance
)Carry out maintenance according to the requirements of diesel and gasoline engines
After regular maintenance, perform performance tests and record them in the work log.
, Maintenance
After hours of use, the hydraulic tamping machine needs to be comprehensively inspected and repaired to restore the components and performance of the tamping machine to the design level. The specific content is:
)Disassemble the vibrating frame, check or replace the bearings
)Disassemble the hydraulic system, clean it thoroughly, and replace the defective sealing ring
)Clean the piston rod and cylinder block, which are seriously strained should be replaced
)Replace all nylon sleeves
)Check and clean the motor bearings, add grease, diesel and gasoline engines according to the instructions
)Repair welding or replace the pickaxe to meet the design requirements
) The aperture of each part should be inspected one by one, and those with serious wear should be replaced
) The oil pump and valve body should be tested on a test bench, and those with poor performance should be replaced or repaired
) The overhauled tamping machine , it needs to go through 3 hours of no-load and 1 hour of trial ramming and test and record various technical indicators. It can only be used after it is confirmed that the design requirements are met.
☆Railway transportation: internal combustion tamping picks, tamping machines, hydraulic rail drilling machines, hydraulic rail drilling machines, manual rail drilling machines, rack-type track starters, hydraulic track starters, rail cutting machine, square sleeper, hydraulic straightener, rerailer, universal gauge ruler, rail grinding machine, square ruler, rail transport car, etc.
☆Track accessories: baffles, switches, switch accessories, switch tie rods, rails Gauge ruler, track gauge ruler, track gauge ruler, 3-gauge ruler, anchor rod, b anchor rod drill pipe, b pneumatic drill pipe, switch pad, track splint, road spike, insulating splint, crossover switch, pad, composite Rubber pads, track fasteners, track clamps, gauge tie rods, guard rail buckle plates, line buckle plate bases, insulated gauge rods, buckle plates, twist drill pipes, coal drill pipes, twist drill pipes, connecting sleeves, chain cranes Tools, draft drills, anchor trays, pallets, nylon baffle seats, manual switchers, manual benders, benders, bending machines, rail press plates, fishplates, fishtail bolts, etc.
Jinzhou Shuangxing sales network: Hebei, Shanxi, Inner Mongolia, Liaoning, Jilin, Heilongjiang, Beijing, Tianjin, Shanghai, Jiangsu, Zhejiang, Anhui, Fujian, Jiangxi, Shandong, Henan, Hubei, Chongqing, Sichuan, Guizhou , Yunnan, Shaanxi, Gansu, Ningxia, Xinjiang and other places.
Note: The above content is provided by Jinzhou Shuangxing Railway Machinery Co., Ltd. Related product parameters and pictures are for reference only. Specific products may have different origins due to different production batches. Please contact the sales staff for specific details.
WhatsApp
