Quote 381LXC-99 explosion-proof electric actuator straight stroke

电压：

220V

输出扭矩：

10000NM

输出信号：

4~20mA

Quotation 3 explosion-proof electric actuator straight stroke, 3 series electronic electric actuator is a fully electronic actuator that uses AC single-phase power as the driving power supply and accepts input signals from a computer regulator or operator to operate. There is a servo system inside the machine, so there is no need to install a separate servo amplifier. The key component controller uses advanced hybrid integrated circuits, which are cast and solidified with resin. After aging treatment, they are highly reliable, moisture-proof, and shock-proof. Use the potentiometer to adjust the zero point, stroke, and sensitivity. It is convenient and easy to use the function switch to arbitrarily select the three states of forward, reverse action, and signal off. At the same time, the actuator has three protection functions: overload protection, temperature protection and compression spring to ensure tight closing of the valve. It is a product with high reliability and can be combined with various linear stroke and angle stroke adjustment valves to form an electric regulating valve.
,
Product features:
, The actuator is designed with a servo system (no need for additional servo amplifier), it only needs to be connected to ~(or~) signal and single-phase power supply to work. Built-in wiring terminals make wiring extremely simple and convenient.
The controller, the key component of the actuator, uses the most advanced hybrid integrated circuit and is sealed and cast with resin. It is box-shaped in shape, small in size and high in reliability.
The feedback detection of driving amount adopts high-performance conductive plastic potentiometer with resolution <.
. It has self-diagnosis function. When a fault occurs, the indicator light on the controller will immediately send out an indication signal.
. Use the status selector switch to set when the signal is off (the valve core is in the fully open, fully closed or self-locking state).
, can be set with the status selector switch (forward and reverse action).
, Use the status selection switch to set the input signal to (~ or ~).
It is simple and easy to adjust the working zero point (starting point) and stroke (end point).
, when the power is suddenly cut off, it can ensure that the valve core is self-locking.
, using synchronous belt drive, effectively reducing noise.
. Delay protection function. When rated load, it can implement state self-locking. When a fault occurs, the protection can be started immediately, and the delay protection can be canceled by reverse operation.
3