Observation window reaction kettle lighting, LED reaction kettle mirror light

Friends who produce reactors or have used containers such as reactors know that this equipment is usually equipped with several small local lighting lamps, which are also called aperture lamps. In the past, the ancient incandescent lamps were used. The light source has a yellowish color, just like the ones in our rural hometown. Nowadays, due to the popularization of light sources, they are also used in the explosion-proof lighting industry. Light sources are also installed on the aperture lamps, which directly replace the incandescent light source aperture lamps and are brighter, more energy-saving and more durable than incandescent light sources. , brighter: the incandescent lamp is, the light source is, the light source is 2 times that of the incandescent lamp, it is definitely better in terms of brightness, of course it is not omnipotent, the color rendering index is still not as good as the incandescent lamp, but it is difficult to observe the materials in the reactor. It is not like spray painting in a spray booth, the requirements are not so high.
More energy-saving: In the past, the minimum number of reactors installed was the ones with higher power. But now, only the reactors need to be installed, or that is enough, saving twice as much power.
More durable: As everyone knows, incandescent light sources use tungsten wire. Once the wire breaks, the lamp is useless and there is no way to repair it. Generally, it will break after a few months of use. Now, it's different. I can use it casually for more than 3 years.
Product: Explosion-proof viewing hole lamp
Model: B,
Light source: Puri lamp beads
Power:,,,
Voltage:,,
Installation Size: outer circle, height
Installation accessories: seat type, vertical type
Suitable places: chemical plant reactors, wine cellars
There were temporary customers as soon as I logged in to QQ after work this morning I sent you information about how to sell the explosion-proof viewing hole lamp from your company. We use it on the reactor. It is mainly used to observe whether the materials inside are in place.
I chatted with him for a while, and it turned out that he wanted to replace the incandescent light source he used before, because the incandescent light source is very not durable and breaks down after a few months of use. It broke after a few months, and the temperature was still high. I used to use a B explosion-proof viewing hole light. I asked if I could replace it with the one I use now. We talked more and I found out that he was traveling with him. I happened to see the lamps supplied by our company on that device. Because the brand on them said Jiaran explosion-proof, I found them online.