Ratchet wrench JB_picture_manufacturer_quote

Ratchet Wrench B_Picture_Manufacturer_Quotation
Detailed Parameters
Ratchet Wrench B_Picture_Manufacturer_Quotation
Jinzhou Shuangxing has recently launched many styles of road maintenance machinery, with prices lower than those in the same industry. The quality is good and regular after-sales visits are implemented, mainly including the tamping machine series. Sleeper wrench series, track lifting machine series, rail drilling machine series, rail grinding machine series, rail gap adjuster series, square sleeper series, hydraulic rail puller series, hand tool series, line fastener series and other railway machinery products , welcome users and distributors to pay attention!
Ratchet wrench B_picture_manufacturer_quote
Ratchet wrench B type uses a reciprocating swing type manual turning nut, which can be loosened or tightened, convenient and fast, saving time and effort . It can meet the torque of railway vertical bolts and is an ideal special tool for tightening sleeper nuts.
Ratchet wrench B is a manual screw tightening tool. After assembly and processing, the front end has a square hole and an embedded movable ball. The wrench can only rotate in one direction. It is generally used with casings. It is very convenient, but its The ratchet has maximum torque.
The well-known imported ratchet wrench brands on the market include: Talent Tools, Ingersoll Rand, Guidori, etc.
Technical parameters of ratchet wrench B:
, maximum torque
, applicable range of nut tightness
Application of ratchet wrench B on railways
Ratchet wrench can meet the requirements of railway vertical bolts of torque, ideal for tightening sleeper nuts.
It manually turns the nut through reciprocating swing, which is convenient and quick, saves labor and time, can be loosened and tightened, has strong applicability, and can easily adjust the use angle.
Ratchet Wrench B_Picture_Manufacturer_Quotation
Maintenance of the machine
Please designate a dedicated person to use this machine. Before each use, be sure to add clean engine oil to each rotating part and oil cup. , after every working hour, loosen the bolts under the torque scale cover, and add molybdenum disulfide grease to the upper and lower clutches, spline shafts, and copper sleeves.
Torque adjustment: Loosen the locking nut under the torque adjustment handle, rotate the torque adjustment handle, counterclockwise to decrease, clockwise to increase, measure with a kilogram wrench, and after confirmation, use a lock Tighten the tightening nut. When leaving the factory, the tightening torque of each motorized wrench is adjusted to approximately ~. For example, when working on a curved section with a radius of less than 1, or according to the requirements of on-site construction, the torque is greater than 1. Torque springs may fatigue and fail after being used for a period of time and must be adjusted regularly.
. This machine is designed with an over-torque protection key. When the torque of loosening the nut is greater than the torque, the safety key will be cut off, thereby protecting the spline shaft and other parts of the machine from being damaged by over-torque.
. Replace the protection key: Remove the torque scale cover, upper clutch and spring, use a screwdriver to pry up the lower clutch, then install the removed parts in sequence, add molybdenum disulfide grease, and then Tighten the torque scale cover.
In order to adapt to different specifications of rails, the adjusting screws must be adjusted to meet the height requirements of different rail types.
Ratchet Wrench B_Picture_Manufacturer_Quotation
- Striving to create the industry's leading brand Jinzhou Shuangxing
Contact: Zhang Gong
Address: Songpo, Linghe District, Jinzhou City, Liaoning Province Road
Office-
Fax-
Customer consultation
Technical service
Jinzhou Shuangxing produces and sells the following products
☆Railway transportation: internal combustion tamping picks, Tamping machine, hydraulic rail hole squeezing machine, hydraulic rail drilling machine, manual rail drilling machine, rack type track starter, hydraulic track starter, rail cutting machine, square sleeper, hydraulic rail straightener, rerailer , universal gauge ruler, rail grinder, square ruler, rail car, etc.
☆Track accessories: baffles, switches, switch accessories, switch tie rods, gauge ruler, gauge ruler, rail gauge ruler, 3-gauge Rulers, anchor rods, B anchor drill rods, B pneumatic drill rods, switch pads, track plywood, road studs, insulating splints, crossover switches, pads, composite rubber pads, track fasteners rail clamps, track gauge rods , Guard rail gusset plate, circuit gusset plate base, insulated gauge rod, gusset plate, twist drill pipe, coal drill pipe, twist drill pipe, connecting sleeve, chain spreader, draft drill, anchor tray, pallet, nylon Baffle seat, manual switch, manual bender, bender, bending machine, rail press plate, fish plate, fish bolt, etc.
Jinzhou Shuangxing sales network Hebei, Shanxi, Inner Mongolia, Liaoning, Jilin, Heilongjiang, Beijing, Tianjin, Shanghai, Jiangsu, Zhejiang, Anhui, Fujian, Jiangxi, Shandong, Henan, Hubei, Chongqing, Sichuan, Guizhou, Yunnan, Shaanxi, Gansu, Ningxia, Xinjiang and other places.
Note: The above content is provided by Jinzhou Shuangxing Railway Machinery Co., Ltd. Related product parameters and pictures are for reference only. Specific products may have different origins due to different production batches. Please contact the sales staff for specific details.