ICC carbon fiber tube PE single wall spiral tube cable protection sleeve-Yanggu Yongsheng Rubber and Plastic

The selection of carbon pipe diameter is based on the cable outer diameter, allowable voltage, current and other engineering conditions. 2. Dig engineering trenches according to relevant department regulations and user requirements. The width and depth must be determined according to the number of cables laid. The distance between the tube and the trench is 3. The distance between the tube and the tube is 3. After laying and placing the carbon pipe into the trench, the curved areas must be sealed with cement to prevent them from being entangled or squeezed. The connection between the two sheathing pipes must be paved with bricks and the heads of the sheathing pipes must be fixed with cement. . When two carbon pipes need to be butt-jointed, first screw the joint to one end of the pipe, then back-screw it to the other end of the pipe, and then wrap it with sealing tape. . Backfilling: After laying the carbon pipe as required, backfill it with the original soil from the trenching, and tamp the backfill soil.