Rail cover mold price and quotation of high speed rail cover mold

规格：

50*25*11cm

规格：

70*50*6cm

规格：

100*50*8cm

Rail cover plate Baoding Yueda mold manufacturer processes and customizes various specifications of rail cover plate molds, high-speed rail cover plate molds, and prefabricated concrete cover plate molds. The steel mesh and steel frame must not be deformed, loose, or open, and the deviation of the steel bar position should comply with According to the provisions of the allowable deviation, all intersection points of the steel bars should be tied with iron wires. Mortar blocks of the same strength, rail cover molds, highway shoulder stone molds, and prefabricated concrete cover molds shall be installed between the steel bars and the formwork. No less than one per square meter shall be arranged. They shall be arranged symmetrically on the same stirrup and adopt a plum blossom shape in the longitudinal direction. The rail cover mold between the multi-layer steel bars of the non-welded steel frame, the high-speed rail cover mold, the prefabricated concrete cover mold, uses short steel bars to support the position to ensure accurate positioning, and the thickness of the protective layer of the steel bars covering the plate is 3. The steel bar meets the anchor When bolting holes, rail cover molds, highway shoulder stone molds, precast concrete cover molds, when passing the steel bars around the holes through the slope of the plate, corner steel bars must be added to the plate and embedded parts must have anti-displacement measures. Specific measures should be short One end of the steel bar is fixed on the embedded part and the other end is fixed on the steel frame. The steel bars should be tied outside the pedestal. The rail cover mold, highway shoulder stone mold, and precast concrete cover mold should be hoisted into the mold as a whole. The wire binding head should be bent inward and cannot be bent outward to contact the formwork to prevent deformation of the steel bars during hoisting. , the upper part of the steel cage is reinforced with steel pipes on both sides. Our engineering plastic molds are favored by our customers for their wear resistance, high gloss, easy demoulding, and good density. We can also make various cement product molds according to customer requirements.