It is widely used in sawing processing in industry, and most sawing uses traditional emulsion to pour a large amount of liquid into the sawing process to lubricate and cool down the cutting friction area. This lubrication method requires filtering of the cutting fluid, so it will inevitably increase The cost.
Dopse
The sawing oil and gas lubrication device has great advantages over the traditional cutting fluid lubrication method
The sawing machine no longer needs to add filtering facilities, saving initial investment.
There is no need to process the workpiece or blank after using oil and gas lubrication, and it can directly enter the next processing process.
,
The sawing oil-air lubrication device consumes an extremely small amount of oil and greatly reduces the cost of cutting oil.
Keeping the processing process clean and environmentally friendly is very conducive to the maintenance of machine tools.
The surface of the workpiece is dry and does not require subsequent cleaning, and it also has anti-rust function.
Choosing a good lubrication method is the key to improving the life of the saw blade
The sawing oil and gas lubrication device has an undoubted effect in improving the lubrication effect and life of the saw blade. According to statistics, oil and gas lubrication greatly reduces the use of sawing. The use of sawing oil-gas lubrication not only saves maintenance costs by reducing the replacement frequency of the saw blade, but also brings much greater benefits than using emulsion lubrication. Therefore, using sawing oil-gas lubrication device is undoubtedly the most economical and reliable solution.
The sawing oil and gas lubrication device is a consumable oil and gas lubrication system. The lubrication method uses oil and gas injection to automatically provide a trace amount of fine lubricating oil mixed with oil and gas to the saw blade. Since the given amount of lubricant is very small, it is directly sprayed on both sides of the saw blade. It can better lubricate the saw blade and is an economical and reliable lubrication method. The supply of lubricating oil is usually the adjustment of the amount of oil supplied intermittently to the saw blade during the cutting process. There are two ways. One is to adjust the oil supply frequency and realize it by controlling the time interval of the pneumatic pulse generator. The second is to adjust the amount of oil supplied by a small lubrication pump.
Sawing oil and gas lubrication
WhatsApp
