Year1
- 型号：
- JRC800/990
- 规格：
- 25公斤/桶
High temperature resistant coating, high temperature resistant anti-oxidation coating, high temperature resistant anti-corrosion coating, metal parts plated with ceramic Bao
1 , Model: R
The water-based inorganic nanoscale oxide coating developed by our company can withstand high temperatures above - degrees Celsius, and has the characteristics of stable, wear-resistant and flame-resistant inorganic raw materials. The pencil hardness can reach - and the nano-scale fine particles have good film-forming properties, wide applicability, and excellent adhesion to various materials. It is a good material for new ceramic coatings and transparent hardening and wear-resistant coatings.
Two: Composition:
Composed of high temperature resistant nano-alumina, nano-titanium oxide, nano-zirconium, etc. All nano-inorganic ingredients!
Model R R
Name: Fire defense line
Temperature resistance: -degree-degree
Three: Characteristics:
High surface hardness, (pencil hardness can reach -), Friction resistance, high transparency, good heat resistance, (℃-℃), hydrophobic, antifouling, atmospheric aging resistance, radiation resistance, the coating film is very dense, and can be waterproof and oil-proof.
The product is water-based, environmentally friendly and non-toxic, has no gas volatilization when heated, and does not stick to water or oil.
The product also has excellent electrical insulation properties, its high-frequency electrical properties are also very good, and it has decorative properties.
The construction technology can be low-cost coating through low-temperature heating and other methods.
4. Product functions:
This series can withstand high temperatures up to 10 degrees Celsius or above.
, has strong high temperature resistance, anti-oxidation, and extends the service life of metal.
Thermal insulation effect. Energy saving: heat insulation, heat preservation
Brush on wear-resistant metal parts and dry them to form dense ceramics, which are wear-resistant and prevent metal pollution.
, anti-corrosion, anti-corrosion protection of the coated object.
, completely inorganic, water-based, no organic pollution.
, has the characteristics of friction resistance, aging resistance, radiation resistance, low temperature non-brittleness, hydrophobic and moisture-proof.
5. Technical indicators:
Technical indicators:
Project technical indicators
Solid content
Heat-resistant temperature ℃ meter
One-time coating thickness
Coating surface hardness
Impact strength
Adhesion (adhesion) grade (grid method)
Weather resistance＞3 years
Water resistance◎
Acid resistance◎
Alkali resistance〇
Organic solubility resistance◎
Gloss spectrum
Flexibility〇
*Note: ◎ means very good, 〇 means good, △ means average, Express difference
6. Main uses:
Coating organic glass, polycarbonate and other materials can improve wear resistance and ultraviolet radiation resistance. It is recommended to be used as aircraft glass, automobile glass, sunglasses, etc. Surface protective film for optical instruments, electronic instrument displays, etc.
Coating copper, aluminum, stainless steel, carbon steel and other metal components can effectively prevent corrosion.
As a glazing coating for paper and ceramics (such as playing cards, trademarks, book covers, etc.), it can make them bright, smooth, wear-resistant and waterproof, and increase elasticity and flexibility.
Insulating coatings for electronic and electrical components under high temperature and high humidity conditions, such as high-frequency coils and high-frequency coils.
, a high-end decorative coating used for interior walls instead of latex paint. It is smooth, wear-resistant and has a long service life.
, other unfinished and undeveloped applications.
Seven, packaging:
Sealed packaging in plastic containers, one bottle per barrel, one barrel
Eight, construction method:
Construction process: pre-treatment rrr paint matching rrr maturation rrr coating Install rrr and let it stand to dry
Pre-treatment of metal substrates: sandblasting, or manual/mechanical grinding to remove rust and oxide films
Pre-treatment of other substrates: degreasing and cleaning to maintain surface quality clean. (Ethanol, etc. can be used)
Dilution is not necessary. Determine whether to use and the amount according to the concentration and coating requirements)
Coating: air spraying, dip coating, and roller coating can be applied. Generally, it can be applied in one step. Control the film thickness, (the spraying area at this time is about /, brush paint)
Curing conditions: Curing at room temperature for 1 hour. Or ℃/minute, or brush ℃/minute. Can only be touched later.
For containers, if it is difficult to clean them with water, you can use ethanol or propanol to clean them.
9. Storage, transportation and safety:
This product should be stored in a cool, ventilated, dry place in a sealed seal, away from direct sunlight and away from fire sources. Storage months
8. Common problems and solutions
Possible reasons and solutions for weak adhesion:
, There is oil or other residues on the surface of the substrate - use acid or ethanol or pure Wash with water and dry before painting
, The surface of the metal substrate is too smooth. Sandblast or sandpaper before painting
3. It is not dried after coating or the drying time is too short - it is recommended to use Drying (°C/3 minutes, or brushing°C/minute) If the workpiece is large or it is inconvenient to dry on site, you can use hot air from a hair dryer or a high-power light bulb for 1 minute.
Possible causes and solutions for bubbles appearing on the surface: dry immediately after painting. The temperature rises too quickly. Let it stand for minutes or flash evaporation before drying.
Possible causes and solutions for excessive viscosity: Normal phenomenon, please dilute according to actual needs when using (the diluent can be ethanol or isopropyl alcohol)
Reasons and solutions for the coating film peeling off after bending: This product is relatively brittle and may fall off after frequent bending or sudden cooling
br/>
WhatsApp
