Manufacturer wholesale and retail HC2286FKS12HYT Pall filter element

直径：

120

高度：

956

材质：

进口玻纤

Introduction to Pengtai Wind Power Filter: A clogged filter will send a signal that it needs to be cleaned. When cleaning, make sure that the motor is not started and the solenoid valve is energized. Unplug the plug. If the filter element is damaged, it must be replaced with a new one. After cleaning the filter, check the oil level and add enough oil if it is insufficient. If no clogging signal is received, clean the filter and filter element for up to six months. Clean the air filter under normal conditions. If the environment is harsh, clean the filter to ensure the normal operation of the fan. The hydraulic oil in the wind power generation filter will contain impurities, which is an important cause of hydraulic system failure. Because the presence of impurities will cause rapid wear, scratches, and damage to the accuracy of the mating surfaces of relatively moving parts. When the particles are too large, the valve core may even get stuck, and the throttle valve orifice and damping holes may become clogged, causing the original parts to malfunction. It affects the working performance of the hydraulic system and even makes the hydraulic system unable to work. Therefore, keeping the hydraulic oil clean is a necessary condition for the normal operation of the hydraulic system. The filter can purify impurities in the oil and control oil contamination. Wind turbine blower cleaning hydraulic filter and air filter