- 板厚:
- 0.28mm 0.3mm 0.4mm
- 尺寸:
- 450*2000mm
Introduction
Material: hot-dip galvanized snowflake sheet
Specifications length, width, rib height and thickness: . .. .
Features
, good mechanical properties, small lateral pressure
br/> It is equivalent to the pressure that general formwork can bear, so it can reduce the amount of support keel of the formwork.
Direct observation of the pouring process
Due to its special mesh, the pouring process can be monitored with the naked eye, thereby reducing the risk of pores and honeycombs.
Light in weight, easy to transport and install
It is only one-tenth the weight of ordinary shaped steel molds, fast to install and easy to transport.
Optimize the process and increase the shear-resistant interface
During pouring, the mortar penetrates into the interface through the mesh holes to form a coarse-grained interface with very ideal shear resistance.
, convenient for threading and continuous tying of steel bars
Due to the porosity of the closing mesh, a dense special grid is used, and the following steel bars can be used to cross with a little force. Steel bars with a slightly larger diameter can be cut through the grid, and the plate can be returned to its position after the steel bars pass through. The quick-and-easy closing net can also be installed before tying the steel bars, and then can be inserted through its mesh to install it.
Adapted to staged concrete pouring, construction is civilized
The permanent formwork can be bonded to the next pouring of concrete without removing the formwork or making joints in preparation, thus simplifying the interface preparation work.
Easy to operate, socket and cut
Multi-functional, easy to cut, and can be bent and formed according to the required mold shape.