Ceramic thermal insulation coating material

Ceramic insulation
. Thermal insulation
. Coating material
. Model:
Component
:
. Nano
Oxidation
Zirconium
nano aluminum oxide
,
,
nano titanium oxide
,
nano cerium oxide, hollow ceramic beads
, etc. All nano-inorganic ingredients!
Content.
. No asbestos fiber,
No organic matter
No irritation to people. Does not pollute the product,
. Product appearance:
. Self-foaming ceramic insulation coating material: white liquid.
. How the product works
Principle:
. The above-mentioned nano-alumina, nano-zirconia, nano-cerium oxide, etc. are often used on the outer surfaces of steel plates, reactors, ceramics, roofs, buildings, etc. The nano-aluminum oxide, zirconium oxide, cerium oxide, etc. on the surface of the nano-oxide particles are close to the atomic size and can reflexively recombine to form a nano-ceramic bubble shell. Combined with the hollow ceramic beads, the heat preservation effect is good. The thermal conductivity effect is
It has the effect of absorbing and reflecting infrared rays and blocking the transfer of thermal radiation. Double thermal insulation!
. Use
coatings indoors in buildings and apply a thin layer to effectively enhance the thermal insulation effect. In autumn, the indoor temperature can be increased by 3℃, and in summer, the indoor temperature can be reduced by the same amount, thus saving considerable water and electricity costs. Since the coating itself has a long life, applying it to the waterproof layer of buildings can reduce roof repair and replacement costs and solve roof leakage problems.
. In addition,
the coating contains high-tech anti-corrosion ingredients, which can not only eliminate the existing corrosion on the metal surface, but also prevent further corrosion on the metal surface.
. It has strong adhesion to substrates such as walls, metals, ceramics, cement, and wood products. Directly apply it on the surface of the substrate for about 3 seconds to achieve the purpose of heat insulation.
. Product functions:
. ,
Thermal insulation, heat insulation
. Low thermal conductivity. The bubble shell and hollow ceramic beads are used to block heat conduction and heat insulation in the air, and nano-alumina, nano-zirconium oxide, nano-cerium oxide, etc. are used to absorb and reflect infrared rays to block the transfer of thermal radiation. Double thermal insulation!
. ,
Sound insulation
. There are many bubble shells inside and the sound conduction coefficient is low. It can not only use the air bubble shell to block sound transmission and reduce noise, but also use nano-alumina, nano-zirconium oxide, nano-cerium oxide, etc. to absorb sound waves to reduce noise and sound insulation.
.
Anti-corrosion
. B forms a hard ceramic layer on the surface of the object to prevent air, corrosive gases, water, etc. from entering, and has a strong anti-corrosion effect
.
. Product usage:
. Thermal insulation. In

℃
℃
any shape of equipment, pipes
, flanges, walls
thermal insulation
, heat insulation, anti-corrosion, etc. .
.,
Widely used in
building
roofs, terraces, exterior walls
, interior walls
and cement asbestos tile surfaces for heat insulation
/>Thermal insulation, sound insulation, etc.
.
Used for heat insulation, cooling
and anti-corrosion
of metal tile surfaces and open-air metal storage tanks and pipes.
,
Small parts and small positions where traditional thermal insulation is difficult to do, just paint
to achieve
thermal insulation
, heat insulation, anti-corrosion, strengthening, Energy saving
.
., High-temperature furnace surface insulation. It plays the role of
heat preservation
, heat insulation, anti-corrosion, strengthening and energy saving
.
. Product customization:
. Products can be adjusted according to the actual situation and needs of customers.
Treatment before and after use:
. Before use, clean the surface and remove dust and floating objects.
. Usage: Adjust the brushing thickness and let it dry naturally. Avoid water leaching during drying.
.
. Construction plan:
. Construction methods such as brushing, roller coating, and spraying can be used.
Stir thoroughly before use
. Grease, dust and other attached dirt on the surface of the object to be coated must be removed and the surface must be dry, flat and strong before construction
. If resistance is required Alkali, sealing rough surfaces or in order to obtain the best results, nano ceramic thermal insulation coating must be applied first
. Measure the humidity according to the standard before painting. The temperature of the masonry below the optimal construction temperature is above Celsius. The actual painted area will vary depending on the construction method, surface smoothness and construction environment.
.
. Product test data report
. Test data
. Coated on the steel plate, the temperature on the inside is the temperature on the outside of the coated steel plate. (Outer chamber temperature)
. Test data
. Coated on the steel plate, the inner temperature is 3 degrees, and the outer temperature of the coated steel plate is
thickness. (Outside chamber temperature)
. Test data
. Coated on the steel plate, the temperature on the inside is the temperature on the outside of the coated
thickness of the steel plate. (Outside chamber temperature)
.
. Read the instructions before use to obtain reliable and satisfactory painting results.
. Store in a cool and dry place, strictly protected from frost (not lower than ℃), the shelf life is one month.
. Masks should be worn during this construction. If it comes into contact with eyes, rinse immediately with water. Tools should be cleaned with tap water immediately after construction.
. After use, the can lid should be tightly closed and sealed to prevent the paint from being contaminated with dust and dirt.
.Meet standard: B/
::