1756-OA8D

[]Module[][] Contact: Wu Jinhui[]
[]Schneider Controller[][] Contact Number: - or ++ WeChat[]
[]BB Robot Display Teaching device[][] Contact:[]
[] Module servo[][] Contact fax:-[]
[]Westinghouse BR module[][] Rich supply and strong strength[]
[]Siemens R module[][] Most in stock, meeting demand[]
[]R Honeywell driver[][] Quality guaranteed, buy with confidence[]
[] Programmable Controller +++++++++ Distributed control system []
There should be a grounding copper bar and terminals under the screen. The specifications of the grounding copper bar are: The grounding terminal is a crimp type. The copper bars between screens should be easily interconnected, and the glass door frame of the screen cabinet should be well grounded.
The screen protection level is Level 3, using high-strength steel composite structure, and fully considering the heat dissipation requirements. The screen cabinet should have good shielding function against electromagnetic interference. The screen size is (height, width and depth).
The screen body should have sufficient support strength, and necessary facilities should be provided to ensure that the equipment can be lifted, transported, stored and installed correctly, and anchor bolt holes should be provided.
All screens should be clean and spray-coated to prevent corrosion and rust during transportation, storage and operation. The inside and outside of the screen should be clean and free of dust, scratches, oil, etc.
Parts and plug-ins that must be replaced in accordance with the manufacturer's specifications should be marked with special symbols.
There should be an analog busbar on the front of the screen.
. Terminal block layout
The arrangement of the equipment in the cabinet and the layout of the terminal block should ensure the independence of each set of devices, so that the normal operation of any other set of devices will not be affected when one set of devices is inspected.
.Battery Bracket
The battery bracket must be able to bear the weight of the battery pack sufficiently. In areas with a basic earthquake intensity of 0.0 and above, the battery pack should have seismic reinforcement measures and meet the relevant regulations in the earthquake intensity. There should be an insulating pad between the battery and the bracket. The distance between batteries is ~ on the left and right, and ~ on the top and bottom. The distance between exposed conductive parts of the battery shall not be less than.
Test
All components used in the DC power system should undergo type testing, factory testing and on-site handover testing in accordance with the corresponding national or industry standards. The on-site handover test can be carried out in consultation with the user.
Material tests should be conducted on each main component of the DC power supply system to confirm whether the components and materials are defective, and whether the design and structure of the components meet the requirements of this specification should be checked.
The DC power supply system should be comprehensively inspected at the factory to ensure the functional integrity and adaptability of the equipment and meet the requirements of this specification and related standards and specifications.
Unpacking and Inspection
. Open the outer packaging of the screen and check whether the accessories such as the power cabinet atlas, operating instructions, product factory inspection form, and certificate of compliance that come with the screen are complete.
.Check whether the cabinet shell and the included modules are seriously damaged during transportation. If there is any damage or missing parts, please contact the carrier and our company for timely processing.
3. Check whether the battery case is damaged, leaking, bulging, etc. during transportation. If so, please contact our company for timely processing.
.If disassembled and assembled at low temperatures, water droplets may condense. It is necessary to wait until the equipment inside and outside the cabinet is completely dry before installation and use. Otherwise, there is a risk of electric shock and damage to the equipment.
. , . . (, , , , , , -, )
/ br. , / r. r, . (-)
- . , . , r. , , , , , -


r r., ., ., .
rr r. - ..
r r.. ..