Year1
- 使用环境：
- 干燥
- 使用场地：
- 平坦3X6米
- 运输方式：
- 陆运
Features of the gantry CNC cutting machine:
1. Novel appearance design, compact structure, easy to learn, easy to operate, and durable
2. It can cut any plane two-dimensional graphics and cut any Non-ferrous metal sheets
3. Cutting thickness: .3, cutting quality is comparable to other imported high-end CNC cutting machines
4. Can execute international standard processing codes, and is common with foreign CNC cutting machines
5. Flexible configuration: flame cutting or plasma gun cutting
6. Economical and practical, high quality and low price!
Our company adheres to the corporate spirit of quality first, reputation first, self-improvement, and morality. We warmly welcome new and old customers to visit us for guidance and business negotiation.
1. Working principle:
CNC cutting machine is a new type of thermal cutting equipment. Its working principle is to use oxygen + acetylene or propane compressed gas, plasma + compressed air or nitrogen as the working gas, and use high-temperature and high-speed flame as the heat source to partially melt the metal being cut, and at the same time use high-speed airflow to melt the melted metal. The metal blows away, creating a narrow slit. This equipment not only has fast cutting speed, narrow slit, smooth incision, small heat-affected zone, low workpiece deformation, and simple operation, but also has significant energy-saving and material-saving effects.
Flame and plasma cutting methods: suitable for cutting various cast iron, carbon steel, stainless steel, aluminum plates, copper plates and other metal materials.
2. Relevant performance characteristics
Rack gantry structure, good system rigidity and high transmission accuracy.
, Bilateral drive, smooth operation.
CNC cutting system, easy to operate.
, fully automatic graphics programming software, easy to nest and operate.
CNC/straight flame cutting machine
Main technical parameters:
Gauge
Rail length
Effective length
Cutting width (straight strip), 3 ( CNC)
Cutting thickness- (within five groups to)
Idle speed-
Cutting speed-
Several groups of longitudinal cutting distance (straight-line single cutting torch, customized according to user needs )
Transverse cutting distance group (CNC cutting torch)
Driving mode bilateral
Cutting surface roughness: R
Cutting gas source oxygen, acetylene or propane (.)
Power supply Voltage
Installed capacity is about
Performance and features:
CNC flame cutting machine is a type of CNC flame cutting machine that our factory independently developed and developed by absorbing advanced domestic and foreign software and hardware technologies for supporting the processing of metal structural parts. High-efficiency automatic cutting and unloading equipment, which can cut longitudinal and transverse straight lines, as well as arc-curve plane geometric shapes. The cutting surface roughness and precision requirements are high, and the deformation is small. The straight cutting torch can cut at the same time, so that the plate does not deform. At the same time, production efficiency is improved. This machine has the advantages of reasonable structure, simple operation and advanced technology.
Among them, the frame transmission uses a motor to drive the gear rack to drive the master and slave cutting torch seats. A steel belt is used for transmission. The steel belt has high strength and elasticity and is used to drag the slave cutting torch. The guide wheels at both ends of the beam move the steel belt After expansion, the driven cutting torch holder can be clamped in front or behind the steel strip with a clamping device to achieve co-directional or symmetrical cutting.
The drive motors all use Panasonic AC servo motors imported from Japan, and the reducer adopts a precision planetary servo reducer. The reducer is sealed and permanently lubricated and maintenance-free to ensure smooth and accurate operation of the equipment. An electric height adjustment system is installed on the CNC cutting torch to cope with uneven heights caused by thermal deformation of the steel plate.
The CNC system adopts Beijing Start CNC system. The system host adopts an industrial-grade R processing chip system to provide 10-channel photoelectrically isolated input and 10-channel photoelectrically isolated output. It is equipped with a .3-inch LCD dynamic display and a fully enclosed touch-type operation keyboard. Equipped with B interface for program upload and download, program reading and timely software upgrade, it supports on-site code programming.
High reliability, with the ability to prevent strong plasma interference, lightning strikes, surges, etc. It can be manually programmed on the system, or it can be programmed through nesting software and then input into the system using a disk ~ 3 large user program storage capacity, processing The program reachable bar can freely convert Chinese and English, and can execute, display, and save Chinese file names for optional segment processing, power outage/breakpoint recovery, mirroring, rotation, scaling, common parts library and other software functions with rich user-friendly operation functions. , Practical flame plasma cutting technology, processing of small line segments, can be widely used in machine cutting and cutting of advertising, iron art, and text.
Welcome to the website of Hubei Meisal CNC Technology Co., Ltd. Our company is located in Huangshi City, which has a profound industrial culture and a good industrial foundation. It is known as the hometown of bronze, the cradle of steel, the hometown of cement and the new city of clothing. The specific address is Building No. 4, Xinxialu Jinhua, Xialu District, Huangshi City, Hubei Province, and the contact person is Wang Xinxian. The contact number is 3, the contact mobile number is 3, and its main business operations are Hubei Messar CNC Technology Co., Ltd. is a high-tech enterprise specializing in R&D, production, and sales of CNC cutting machines. Its main products are: CNC cutting machines, CNC flame cutting machines, CNC plasma cutting machine, CNC intersecting line cutting machine, non-standard CNC cutting machine, welding equipment and CNC machine tool equipment. The structure types of cutting machines are divided into: portable CNC cutting machine, cantilever CNC cutting machine, gantry CNC cutting machine, desktop CNC cutting machine, intersecting line CNC cutting machine, etc. . Registered capital of the unit The registered capital of the unit is RMB - 10,000 yuan. Welcome to pay attention to our company. Our company specializes in portable CNC cutting machines, tube-sheet integrated plasma cutting machines, flame straight cutting machines, CNC gantry cutting machines, CNC cutting machines, intersecting line cutting machines and other products. It has classic technology and first-class service!
WhatsApp
