Where to purchase 3T hand winch hoist [Hebei Guangyu]

Product introduction... Guangyu brand hand-operated winch hoist for Hunan reservoir. Hand-cranked winch price sales hotline: Keywords: Winch hoist price. Hand-cranked winch hoist manufacturer. Hoist sales manufacturer. Hand-operated winch. Winch price Guangyu brand hand-operated winch hoist adopts foreign advanced Lebos drum to solve the problem of multi-layer winding of wire rope. It is used for opening and closing of down-the-hole high-lift plane gates and high-lift lifts with lifting heights above meters. Hoist products,. This product is widely used in irrigation and drainage, hydropower stations, reservoirs, river management, aquaculture, environmental protection, sewage treatment and other water conservancy projects. Note: The winch hoists produced by our factory can be divided into two types: single lifting point and double lifting point. There are four models:,,, for everyone to choose from. The first three types of door opening force are - and the type is -. The above products are available for users to choose. Precautions when using the Guangyu brand hand-operated winch hoist require that the wire ropes on the drum of the Guangyu brand hand-operated winch hoist should be arranged neatly. If overlapping or diagonal winding is found, the machine should be stopped and rearranged. It is strictly prohibited to pull or step on the wire rope with hands or feet during rotation. The wire rope must not be laid out completely, but should be kept for at least three turns. The wire rope is not allowed to be knotted or twisted. If the wire rope is broken within one pitch, it should be replaced. No one is allowed to cross the wire rope, and the operator is not allowed to leave the switch after the object is lifted. Objects or cages should be lowered to the ground during rest periods. The driver and signalman should maintain good visibility with the hoisted objects. The driver and signalman should cooperate closely and obey the unified command of the signal. In the event of a power outage, the power supply should be cut off and the lifting object lowered to the ground. The product features of Guangyu brand hand winch hoist are as follows: Guangyu brand hand winch hoist is equipped with upper and lower stroke limit shapes for extreme protection operation. The center distance of the hanging points should be selected and determined within the range specified in the parameters. The overall mechanical strength of the machine is calculated according to the light duty level, and the motor is based on short-term operation. If the working level needs to be improved, the user should propose it, and then change the hoist manufacturing pattern type, manufacture and supply it. Guangyu brand hand winch hoisting machinery has two descent speeds: fast and slow. The slow speed is the speed under normal power supply. The fast speed is when the motor is not powered and relies on the gate's own weight (or water column pressure) to drive the mechanism. Rapid decline, its rapid value is affected by the speed regulator and must not exceed /, the rapid door closing time is generally. According to the door opening height, the user should provide parameter values or give the distance from the gate pin center to the hoist base. When there is a tie rod, the pin center should be the center of the upper shaft hole at the top height position. We will provide the foundation layout diagram of the Dongyuan brand hand winch hoist machine and the load acting on the foundation for reference only during the hydraulic construction design. If the user has special requirements, both parties can coordinate and solve them.