Quotes for various models of Guangyu winch hoists certified by the Ministry of Water Resources

Basic requirements for the installation of fixed winch hoists. Basic requirements for the installation of fixed winch hoists? . Before the winch-type hoist leaves the factory, it should be fully assembled and tested. It can only leave the factory after passing the inspection. Products must have certificates of conformity, product instructions and production licenses. .After the winch hoist is transported to the site, the side and top clearance of the open gear, the percentage of gear meshing contact spots, the top and side clearance between the bearing bush and the journal, etc. should be retested. The results should comply with the specifications. Require. When necessary, the equipment should be disassembled, cleaned, and inspected. .The installation, testing and quality grade assessment of the winch hoist electrical equipment should be carried out in accordance with the current relevant national and industry standards and specifications. .The installation position of the hoist should be on the same baseline as the center of the civil gate hole and the center of the door slot. The above content is compiled based on the problems encountered by students in actual work for reference. If you have any questions, please communicate and correct them in time.