Supply JZ-10 stable drilling winch, well drilling winch manufacturer China Coal has high quality, stable drilling and large rope capacity

1. Overview of shaft sinking winches
- China Coal Industry and Mining is a well-known winch manufacturer. The shaft sinking winches manufactured are mainly used for suspending suspension plates, water pumps, water pipes, and grouting during shaft excavation in coal mines, metal mines, and non-metal mines. Pipes, air ducts and other excavation equipment and tensioning ropes. The winch is mainly used to replace the tail rope connected between the two cages of the hoist, and it is best to replace the flat rope. It can also be used as a shaft winch, and its performance is the same as that of the shaft.
- 2. Characteristics of well-sinking winches
- Well-sinking winches have the advantages of strong lifting capacity, large rope capacity, and smooth operation
- 3. Applications of well-sinking winches
- It is mainly used for tension and stabilizing ropes for suspending lifting disks, water pumps, air ducts, compressed air cylinders, grouting pipes and other excavation equipment in shaft excavation projects of coal mines, metal mines, and non-metal mine shafts. It can also be used for other underground and ground lifting. Use with heavy objects.
- 4. Lubrication of the well drilling winch
- The reducer should be lubricated with winter use
- gear oil or
- saturated cylinder oil. The oil level should ensure that the worm is completely immersed in the oil. middle. The oil of the reducer should be changed once a year.
- The main shaft bearing and the bearing at the output shaft end of the reducer should be replaced or replenished regularly with
- calcium-based grease, and the oil should be changed every two years.
- Open gears should be filled with lubricating oil before each drive.
- Other parts that need lubrication should be lubricated before each start of the vehicle. In particular, the thrust ring between the two gears on the output shaft of the reducer and the sleeve of the movable gear should be filled with lubricating oil.
- 5. Adjustment of the well sinking winch
- After the winch is installed, it must be inspected and adjusted.
-, open gear transmission, tooth side clearance is
- mm, its contact area along the tooth height is not less than
-, and the tooth length is not less than
-.
- Check whether each transmission system of the working brake is flexible and reliable, and adjust the gap between the brake shoe and the brake wheel to not be greater than
- when releasing the brake.
- Check whether each transmission system of the safety brake is flexible and reliable, and adjust the gap between the brake shoe and the brake wheel to not be greater than
- when the brake is released.
- Check whether the control appliances of the working brake and safety brake are interlocked with the main motor, that is, when the main motor is started, the working brake is released, and when the main motor is stopped, the working brake is applied, and only when the safety brake is released can the main motor be started. .
- 6. Trial operation of the well-drilling winch
- After the winch is installed and confirmed to be correct after inspection and adjustment, each lubrication part can be lubricated, and a no-load trial operation can be carried out. After winding, load operation can be carried out, and the load can be gradually loaded. to rated load. Under standard voltage, the current does not exceed the rated value, and the motor, reducer and other parts do not generate heat.
- 7.
- Specific parameters of the series of well-sinking winches
< r::/~~_
. China Coal Industry and Mining is a well-known winch manufacturer, and the quality of its well-sinking winches is Guaranteed, low price, is your best choice. In addition, we supply high-quality mining winches, pneumatic winches, and mining winches
,
- Scheduling winches
,
- Back column winches
,
- Shaft sinking Winch, etc.
- Various mining winches
,
- Scheduling winch
,
- Back column winch
,
- Shaft sinking winch Complete models
- Welcome to order
!
- Contact person: Li Hua
- Mobile phone
:
- Fax:
:
- Wangwang:
- Email:
@
- Company address: North of Kaiyuan Road, High-tech Zone, Jining City, Shandong
- No.