Landslide Flexible Active Protection Net Slope Protection Net

Flexible protective net (active type) is laid on the mountain slope embankment to play the role of interception and protection. External net, inner net, anchor rod, suture rope, support rope, etc. are used in combination. External net: The square holes of the wire rope net have a certain elasticity and impact resistance, and can intercept stones, etc. Inner mesh: Steel wire grid with diamond-shaped holes and large elasticity to fix the soil and can also be used to plant plants to prevent soil loss. It is suitable for fixed grids for greening. Anchor rod: According to the soil quality (geological formation conditions), it can be designed into . meters. Fixed external network and internal network to provide better interception and protection. The suture rope support rope is used to connect the suture outer and inner nets, making the entire protection system powerful. The above materials are all made of high-quality hot-dip galvanized steel wire, which has strong anti-corrosion ability and long service life. Active protection net: The specifications of the net blocks are represented by the length of the outer edge after unfolding and tensioning. There are rectangles and right triangles with specifications such as *, *, *, *, *, *, * (that is, the diagonals of the aforementioned specifications of the net blocks. Bisected, the aforementioned specification is the length of the right-angled side) and the oblique rhombus (α) (that is, the opposite sides of the rectangular mesh block of the aforementioned specification are parallel offset, and the aforementioned specification is the side length). The negative error of the side length of the mesh block should not be greater than that, and the positive error should not be Greater than one mesh side length, the angle error should not be greater than ° Inner mesh specifications: .*. Mesh, high-strength steel wire grating: mesh block specifications are expressed by the length of the outer edge after unfolding and tensioning, including 3*, 3* , 3*3.*, 3.*, 3.*3 and other specifications, the negative error should not be greater than. The mesh specifications are represented by the diameter of the inscribed circle, such as,,,, and so on.