High-quality hydraulic stationHydraulic station spot supplyHydraulic station factory direct sale

Hydraulic station, also known as hydraulic pump station, is an independent hydraulic device. It supplies oil according to the requirements of the driving device (host) and controls the direction, pressure and flow of oil flow. It is suitable for various hydraulic machinery where the host and hydraulic device can be separated. Down. After purchasing, the user only needs to connect the hydraulic station to the actuator (cylinder and oil motor) on the host machine with oil pipes, and the hydraulic machine can achieve various prescribed actions and working cycles. The hydraulic station is composed of a pump device, a manifold or valve combination, a fuel tank, and an electrical box. The functions of each component are as follows: Pump device - equipped with a motor and an oil pump, which is the power source of the hydraulic station and converts mechanical energy into power energy of hydraulic oil. Manifold block - is composed of hydraulic valve and channel body. It regulates the direction, pressure and flow of hydraulic oil. Valve combination - it is a plate type valve installed on the vertical plate, and the pipe behind the plate is connected. It has the same function as the manifold block. Oil tank is a semi-closed container welded by steel plates, which is also equipped with an oil filter, air filter, etc. It is used for oil storage, oil cooling and filtration. Electrical box – available in two forms. A terminal board with external leads is equipped with a full set of control electrical appliances. The working principle of the hydraulic station is as follows: the motor drives the oil pump to rotate, the pump absorbs oil from the oil pump and pumps oil, converting the mechanical energy into the pressure energy of the hydraulic oil. The hydraulic oil is controlled by the hydraulic valve through the integrated block (or valve combination) to achieve direction, pressure, and flow. After adjustment, it is transmitted to the oil cylinder or oil motor of the hydraulic machine through the external pipeline, thereby controlling the change of the direction of the hydraulic machine, the size of the force and the speed of the speed, and promoting various hydraulic machines to do work.