Electronic manual soldering smoke purifier X3000

Solder
Soldering
produces
smoke
contains solder resist particles,
seriously affects human health,
needs to be eliminated,
So there are
smoking instruments
or
solder air purifiers
Generally simple equipment is equivalent to the method of fan +
filter sponge
,
Can effectively filter smoke
or
Smoke
Flow direction
This is a low-cost, open,
effective solution,
The key is to filter the sea surface,
It has imported activated carbon ingredients,
There is also a
powerful smoke purifier,
similar to the principle of a vacuum cleaner,
the smoke passes through dozens of filter layers in the filter box Filtration,
is a closed filtration device,
mostly used in clean room laboratories with high purification requirements,
the effect is much higher than the former
The representative is the series of solder smoke purifiers
Under
decibel
noise
Powerful filtering
The last one is above
the welding head

Smoking pipe
Device,
very effective,
but
less suitable for
dense components
and
micro-soldering,
not popular anymore
Advantages:
① Filter dust particles and purify toxic and harmful gases: the purified air is 3 times cleaner than naturally breathable air, reducing the harm to the environment and human health.
②Energy saving, low power consumption, which machine can be used at whichever station is used, and the suction power is adjustable.
③High filtration and purification rate: 3 micron dust particles can be filtered.
④ Cleaning and care are convenient and quick.
⑤ Do not remove the air conditioning from the workshop to reduce air conditioning electricity bills.
⑥ It is flexible and convenient to move and can be moved according to changes in operating requirements.
⑦ Purify the air, benefit the health of employees and surrounding residents, and reduce the occurrence of occupational diseases.
⑧The noise is low, only - 1 decibel, and will not affect employees and residents around the factory.
⑨ It is a fixed asset of the company and can be used when moving factories or changing sites.
Product parameters
Voltage range:
Input power:
System flow (including filter device): *
Filtration efficiency: .3
Smoking arm:. (Standard configuration)
Negative pressure:
Noise: less than
Dimensions (length/width/height)
Weight:
Operating instructions
Open the computer cover , correctly install the primary effect, medium effect and main effect filters, close the top cover and fasten the buckle.
.Install the smoking arm tube and adjust the direction.
3. Connect the power cord and check whether the power plug is stable and secure.
. Turn on the power, then press the on/off button on the machine panel, or press the power on/off button on the remote control, and the smoke purification system will start working.
.The machine is equipped with a remote control panel. The knob can adjust the air volume and control the machine switch. It is very convenient to operate and simple to use.