Supply primary effect plate filter/Dezhou primary effect plate filter manufacturer

Supply primary effect plate filter/Dezhou primary effect plate filter manufacturer primary effect plate filter Primary effect plate filter is mainly suitable for primary filtration of air conditioning and ventilation systems, clean room return air filtration, and pre-filtration of local high-efficiency filtration devices. Used to filter dust particles of particle size and above. It is also used for primary protection of multi-stage filtration systems. The primary effect plate filters produced are plate type, dense pleated type and bag type. The outer frame materials include paper, aluminum plate, cold plate spray molding, galvanized plate and stainless steel plate. The filter materials include non-woven fabric, chemical fiber, glass fiber, nylon mesh, etc. The air outlet surface of the non-woven filter material has been smoothed to prevent the non-woven fiber from breaking and scattering to cause secondary pollution. Primary effect plate filters are widely used: the products have been successfully widely used in electronics, electrical appliances, aerospace, automobiles, medicine, environmental protection and other industries as well as in clean environments such as telecommunications banks, smart buildings, hotels and restaurants. 1. Features of the primary effect plate filter: Before the filter material is pleated, a layer of galvanized iron mesh is attached to the air outlet surface of the filter material. This can protect the filter material from being blown and prevent the filter material from being blown. Deformation due to wind pressure ensures that all filter media surfaces can be fully utilized. The filter material fibers are treated with acupuncture to form a gradient structure. This filter has the characteristics of higher dust collection capacity and longer service life. The outer frame of the primary-effect plate filter is composed of a strong waterproof board, which is used to fix the folded filter media. The diagonal design on the outer frame of the primary effect plate filter can provide a large filtration area and enable the internal filter material to adhere tightly to the outer frame. The surroundings of the filter are bonded to the outer frame with special professional adhesive glue to prevent air leakage or damage caused by wind resistance pressure. 2. Characteristics of primary effect plate filter: .Lightweight plate structure: high-quality polyester synthetic fiber filter material, low initial resistance and good fire resistance. .Sturdy and detachable outer frame: It adopts a sturdy plate aluminum alloy frame with aluminum alloy corners. The structure is strong and stable, ensuring that the filter will not be deformed or damaged in poor working environments. The outer frame adopts a detachable design, which is convenient. Replace the filter material to achieve frame reuse. .Filter reinforcement: further enhances the sturdiness of the filter. At the same time, the balanced spacing and double reinforcement design ensure that the filter has a contoured pleat shape, so that the filter can achieve the maximum dust holding capacity with minimal resistance. .The primary effect plate filter can be used directly or as a primary filter to protect the medium and high efficiency filters in the middle and rear sections of the air conditioning system. .The fibers are treated with a special rolling technique to form a gradient structure, so that the filter has the characteristics of low pressure loss, high dust capture capacity, and long service life. .The filter material is made of high-quality polyester synthetic fiber, which can be cleaned and reused many times. It has a long service life. The fluffy and gradually dense fiber structure ensures a high dust collection rate and a large dust holding capacity, and effectively prolongs its rear-end center. The service life of the efficient filter.