Liaocheng electronic scale-floor scale installation and maintenance-Liaocheng Xinhua Scale

Liaocheng Xinhua Scale Co., Ltd. - a recommended manufacturer of electronic scale products. For many years, the company has been committed to the development, production, installation and maintenance of electronic scale series products. It has rich experience in the production of electronic scales and its products have always been trusted by our customers. , in order to repay new and old customers, the company promises: the company's products are guaranteed to be of genuine materials, not adulterated and labor-saving, and to be conscientious products, so that customers can buy with confidence and use with comfort. For product models and quotations, please call: for consultation. Main technical indicators of the electronic scale: , Product name: Electronic truck scale (electronic scale) , Weighing range: -ton Safety overload: , Number of sensors: as needed, System power supply (-~+) ± , Temperature range: ℃ ~ + ℃ , Relative humidity: ≤, no condensation, scale protection level: , Stability time: ≤ Precautions for using electronic scales: Check whether the wiring is correct, whether there is looseness, disconnection, short circuit, etc. If found, repair the scale platform immediately There should be no foreign objects such as stones or coal stuck in the surrounding gaps. Always check whether the limit gaps are reasonable. The limit bolts and the scale body should not collide with each other. Generally, the gap is ~3mm. The connectors should be maintained every six months. The support head should be coated with butter and cleaned frequently. The surface of the scale platform should be kept clean, and the surface paint should be repainted regularly (recommended once a year). Arc welding operations are prohibited on the scale platform. If arc welding operations must be performed on the scale platform, the following points should be noted: Disconnect signal The ground wire of arc welding must be set near the part to be welded and firmly connected to the scale body. The sensor cannot become part of the arc welding circuit. Liaocheng Xinhua Weighing Instrument Co., Ltd. Address: No. Jiuzhou Road, Liaocheng Development Zone. Customers are welcome to visit the company for on-site inspection!