Wuhan floor Wuhan epoxy floor paint Wuhan epoxy floor construction Wuhan wear-resistant floor paint

Epoxy floor paint is a high-value, high-quality, high-demand product. Correct use can keep the floor looking like new and extend its service life. Therefore, mastering the correct maintenance methods is a serious matter. Wuhan Bocheng Innovation Engineering Company has summarized the following two suggestions for our customers based on rich construction and maintenance experience: Suggestion 1??. After the construction of the flat floor is completed, it needs to be maintained until it can be put into use. During the maintenance period, water or other solutions should be avoided from infiltrating the surface??. Employees who enter the workshop must change into rubber-soled shoes (black-soled shoes with foam soles are not allowed) (to avoid bringing outside sediment into the workshop and scratching the ground)?? . All hardware: such as iron chairs, iron tables, iron shelves, etc., must have their feet wrapped in soft plastic, rubber or padded with paper to avoid scratching the ground during use. The tractor must fully lift the machine board off the ground. When turning, please pay special attention to the corners of the machine board to avoid scratching the ground. When cleaning the floor, please use a soft mop with good water absorption or a wet and dry vacuum cleaner. It can be cleaned with water or detergent, but please note that the floor is slippery. If it is worn or scratched due to long use, a small area can be partially repaired. If the area is larger, it is recommended to re-roll it. Before the equipment enters the factory, lay cardboard boxes on the floor to avoid scratching the floor during transportation of the equipment. Please use hard or elastic rubber wheels for carts and pallets, and use them separately inside and outside the factory. Waxing treatment can be done according to the requirements of the floor (the effect can prevent scratches on the floor) Suggestion 2??. In the case of production and construction at the same time, the construction environment must have sufficient isolation areas to prevent dust, sand, etc. from penetrating into the wet paint film epoxy floor. ． Areas that are easily contaminated and more conspicuous facades should be cleaned once a day with a wide cloth mop. ??． If there are coarse and hard sand and mud on the ground, they should be cleaned up in time to prevent the sand from grinding the ground and reducing ground wear. ． Employees should change to soft-soled shoes before entering the clean area. Plastic blankets should be installed at the junctions and entrances and exits where sand and mud are easily introduced to facilitate employees to remove debris from the soles when entering and exiting. ． When unloading goods from forklifts and forklifts, pay attention to placing the goods flat to avoid scratching the ground due to side loading or dragging. ． Try to avoid braking when vehicles, forklifts and forklifts are running. ． Areas with frequent oil leakage should be cleaned frequently with sawdust to prevent the oil from denaturing and adsorbing the ash layer, becoming stubborn stains. For large oil-soaked areas, use a wide cloth mop to push the sawdust around to absorb the oil from the floor. ． Try to avoid hitting the ground with machine repair tools. ． If there is any large damage to the paint film, report it for repair in time so that repair work can be carried out before the oil stains penetrate into the foundation. When washing the floor with water in the workshop, avoid depositing the oil-water mixture in deeply damaged areas. Wuhan Bocheng Innovation Engineering Co., Ltd. is a professional epoxy floor design and construction company. It has senior technical instructors and a solid construction team. It will definitely become your best choice for epoxy flooring. If you want to know more about the performance of epoxy floor materials, please consult -.