Year1
- 规格：
- 1*5cm
- 包装：
- 散装
- 颜色：
- 红色
The soft and hard quick-opening tool is a new soft and hard quick-opening tool produced by our company at the end of the year. The tool is equipped with a soft and hard quick-opening head, a sliding handle and two sleeves, and comes with a considerable number of bubbles. The tool heads are as follows: Buyang double row, double row curve, security, B Kabbah lock positive slot, B Kabbah lock reverse slot, Wangli lock, single row curve and Buyang semicircle, Xinbaodean semicircle, blade lock, B lock without Side trough. The method of using the tool is simple and easy to understand. Just fold the foam and put it into the tool, insert the lock cylinder and twist, which is quick and efficient.
After the hard and soft quick-opening tool is inserted into the lock cylinder, because the foam sponge is elastic and has good contraction force, after shaking slightly from left to right, the marble will be pressed down by the pressure of the spring. If the lock cylinder has a small drop, Basically, the marbles are all in place (reaching the cutting line between the lock body and the upper and lower marbles of the lock core), so that the lock can be opened quickly by twisting the tool. Some locks with large marble drop, after shaking, , 80% to 90% of the beads are in place, and one or two beads are not in place. The one or two marbles that are not in place are directly broken by strong twisting. Since the marbles are made of copper, the tools are made of harder tools. Made of steel, the one or two marbles that were not in place could not withstand the forced twisting of the tool, so they were broken, so that the lock could be twisted and opened. In this way, the original marble eye contained two marbles and a spring, and now it has become a three-section marble. One of them (or the upper ball, or the lower ball) is mostly the lower ball, which is basically the longer marble. The reason why it cannot be in place is that the marbles are longer. After the marbles push these long marbles to a certain extent, although the foam sponge has a certain shrinkage, when the spring force on the long marbles reaches a certain level, then the spring force on the long marbles reaches a certain level. When the spring reaches its limit, it is no longer able to push down. It cannot withstand the hardness of the foam sponge, so the long marble cannot reach the position.
Locks opened with this soft and hard quick-opening tool basically use the original The key can continue to open, but it cannot be opened if it is not the original key, but some locks will get jammed with the original key. The reason for jamming with the original key is that after the long marbles were broken, the original two marbles became three-section marbles. beads, their length in the marble eye has basically not changed. There will be some burrs after two sections are broken on the marble. (After turning the tool a few times, the phenomenon of jamming when opening with the original key will gradually disappear. Reduce, and finally it can be opened freely with the original key
WhatsApp
