Shanghai Chongming County submersible pump manufacturer

Shanghai Chongming County Submersible Pump Manufacturer Shanghai Chongming County Stainless Steel Sewage Sewage Submersible Pump Purpose:
The electric pump rotor shaft is made of high-quality steel material to ensure that the shaft has more reliable mechanical strength and can effectively improve the wear resistance and corrosion resistance of the shaft. performance, and also facilitates impeller maintenance and disassembly. The motor casing is made of high-quality stainless steel, and the motor is self-cooled by water. When the pump is working, the motor part can be completely exposed to the water for long-term operation, thereby overcoming the problem that the motor cannot dehydrate when the domestic sewage pump is working, and improving the service life of the water pump. .
Shanghai Chongming County stainless steel sewage and waste submersible pumps are widely used in industry, agriculture, mining, construction, municipal environmental protection and other places. It can pump liquids containing short fibers, paper scraps, sand solid particles or soft solids, such as mud water, gray water, domestic wastewater, river water, manure, etc. It is an ideal water conservancy equipment for agricultural drainage and irrigation, river pond dredging and construction sites. , but it is not suitable for use in occasions with explosion-proof requirements.
Safety precautions for the use of stainless steel submersible pumps
When the stainless steel submersible pump is working, pay attention to the drop in water level. The submersible pump must not work outside the water.
If during use, if you find that the submersible pump stalls, produces less water, makes noise, and the thermal protector frequently jumps, you should stop the pump in time.
Check whether the power supply voltage is too low or out of power, the cable is broken or the phase is missing.
, check whether the impeller is stuck or worn, whether the water outlet chamber is blocked, whether the lift is too high or too low, whether the filter is blocked, etc. If there is a fault, find the corresponding solution.
. If the stator winding is burned out or other faults occur, it must be sent to the maintenance unit for repair. When reassembling, the air pressure of the sealing part must be checked.
If the cable is found to be damaged, replace it immediately before use. For example, if the stainless steel submersible pump is used to drain thicker slurry, it should be placed in clean water and powered on for a few minutes to clean the slurry in the pump. , then wipe it dry and apply anti-rust oil, and store it in a ventilated and dry place.
Shanghai Chongming County Stainless Steel Sewage and Waste Submersible Pump Product Overview:
Type stainless steel sewage and waste submersible pump (hereinafter referred to as electric pump), which implements B/- standard. The electric pump consists of a water pump, a seal and a motor It consists of three parts. The motor is located on the upper part of the electric pump. It is a single-phase or three-phase asynchronous motor. The water pump is located on the lower part of the electric pump. It is a flow channel impeller and volute structure. A mechanical seal is used between the water pump and the motor. The seals of each fixed stop are oil-resistant. The rubber sealing ring is used as a static seal, and its structural design is unique, compact, beautiful and leading.