How much does a Sitong 16-ton truck crane cost? We guarantee that we will give you the lowest price and the best small crane.

/3/ton truck crane Foton chassis
Protection technology for safe use in high temperatures in summer
In order to ensure that the cooling system of the small machine is efficient, before entering summer, all components of the cooling system should be thoroughly cleaned, Tighten and lubricate, and clean the cooling system scale as much as possible (including cleaning the scale in the radiator) to improve heat dissipation efficiency, keep the cooling system smooth and accelerate the circulation of cooling water.
Check the water pump and fan drive belts. After long-term use of the belts, the belts will fatigue and deform, reducing the cooling effect. When replacing the belt, pay attention to the model and length, and adjust its tightness correctly.
Check the hose connecting the water tank. The hose of the water tank has poor oil resistance and is prone to early damage, thus affecting the water supply and causing the engine temperature to rise too high. Check for cracks and leaks and eliminate them promptly. At the same time, a sufficient amount of cooling water should be maintained, and if insufficient, add it in time.
In order to ensure the correct use of the whole machine, always pay attention to the reading of the water temperature meter. When it reaches the above reading, measures must be taken. You can choose to park in the nearest shaded area and cool down at idling speed. Be careful not to turn off the engine immediately to prevent the engine from overheating and causing accidents such as cylinder pull. After the temperature drops, you should also check the tension of the fan belt.
Before entering summer, it is necessary to perform a targeted performance test on each component of the lubrication system to ensure accurate indications of the oil pressure gauge and gearbox pressure gauge. Conduct a systematic inspection of the oil in the gearbox, pitch converter and drive axle, from oil quality to oil quantity, and keep the oil clean.
During summer driving, the number of tires on small loaders is usually about 10 layers. Compared with large tires, the heat transfer is faster. It is easy for the tires to overheat, which increases the internal pressure and causes the rubber physical properties of the tires to decrease, so that Cause a tire blowout. If the tire pressure or tire temperature is found to be too high, you should park the car in a cool place to cool down before continuing to drive. Never use deflation to reduce tire pressure or pour cold water on hot tires.
Frequently check the braking performance of the entire machine in order to detect and eliminate faults in the braking system early and reduce the risk of accidents. If the brake is used for a long time, the temperature of the brake hub and brake pad will be too high, and the braking performance will decrease. The vehicle should be stopped immediately to cool down, so as not to bring hidden dangers to the safety of the entire machine operation. But it is never allowed to pour cold water on the brakes to force cooling.
Ensure the electrolyte level of the battery. Summer temperatures are high, evaporation is large, and the liquid level drops quickly. Distilled water or electrolyte (pay attention to its purity) should be replenished in time as needed to keep the liquid level higher than the top of the plate. 1. Avoid plate oxidation. The dirt on the surface of the battery and the oxides on the poles and wire connectors should be cleaned in time. The ventilation holes should be kept clear and clean, and the battery should be fixed firmly. Troubleshoot battery faults in a timely manner and ensure timely inspection and maintenance.
In summer, the driver of the vehicle is prone to fatigue after driving for a long time. When the driver feels tired, he should stop the vehicle in time and take a proper rest. He should not drive excessively due to fatigue. Make sure you get enough sleep and have good energy and stamina so that you can work more efficiently.
If the whole machine encounters water wading, then the disc brake after wading is flooded, so it should be driven at a low speed, and the heat generated by the friction between the shoe and the brake hub should be used to dry the shoe to avoid braking. Not working.
The lubrication of the transmission system and the wear of the transmission mechanism of the whole machine under high temperature conditions mainly depend on the quality of the lubricating oil used. Long-term tests have proven that using lubricating oil with a higher stickiness can make the Reduces wear on the drive system. Use lubricants with a high dropping point. In particular, be careful not to allow water and air to enter the hydraulic system, which will cause changes in the hydraulic system and cause wear and corrosion in the system.
The weather is hot in summer. On the one hand, the driver consumes a lot of physical energy and is prone to fatigue. On the other hand, the whole machine is also prone to malfunction due to high temperature. Therefore, both must be adjusted in time to achieve their best state and safety. The whole earth spends summer.