Guanya SFY-60E corn moisture tester recommended by experts

KaiTi, KaiTi_, Guanya Moisture Meter is a new type of rapid detection instrument. Its ring-shaped halogen heater ensures that the sample is evenly heated during high-temperature testing. The surface of the sample is not easily damaged and dries quickly. During the drying process, the moisture meter continuously measures and promptly displays the moisture content lost by the sample. After the drying process is completed , the finally measured moisture content value is locked and displayed. Compared with the international oven heating method, the test results have good consistency and are replaceable, and the detection efficiency is much higher than the oven method. Generally, the sample only takes a few minutes. It can complete the measurement. The instrument is easy to operate and the test is accurate. The display part uses a red digital tube, and the indication value is clearly visible. It can display the moisture value, sample initial value, median value, test time, temperature initial value, final value and other data. And has the function of connecting with computer printer.
.3 KaiTi, KaiTi_, Guanya-Corn Moisture Meter:
.3 KaiTi, KaiTi_,
KaiTi, KaiTi_, , Weighing range:
.3 KaiTi, KaiTi_,
KaiTi, KaiTi_, , Moisture measurement range:
.3 KaiTi, KaiTi_,
KaiTi, KaiTi_, , Minimum weighing reading:
. 3 KaiTi, KaiTi_,
KaiTi, KaiTi_, , Sample quality:
.3 KaiTi, KaiTi_,
KaiTi, KaiTi_, , Heating temperature range: starting -℃
.3 KaiTi, KaiTi_,
KaiTi, KaiTi_, , Moisture content readability:
.3 KaiTi, KaiTi_,
KaiTi, KaiTi_, , Display parameters: Species
.3 KaiTi, KaiTi_,
KaiTi, KaiTi_, , communication interface:
KaiTi, KaiTi_,
KaiTi, KaiTi_,
.3 KaiTi, KaiTi_,
KaiTi, KaiTi_, , Dimensions:
.3 KaiTi, KaiTi_,
KaiTi, KaiTi_, , Power supply:
.3 KaiTi, KaiTi_ ,
KaiTi, KaiTi_, , Frequency:
.3 KaiTi, KaiTi_,
KaiTi, KaiTi_, , Net weight:
.3 KaiTi, KaiTi_, Guanya- The formal operating procedure of the corn moisture meter
.3 Italics, Italics_, 1. Place the instrument on a flat test bench (Note: There is no vibration on the test bench, no wind blowing around, no magnetic field, and no interference with the instrument. Interfering factors, etc.). For the new instrument, first remove the sponge that protects the heating lamp.
.3 KaiTi, KaiTi_, 2. Loosen the weighing protection screw at the bottom of the instrument by 3 mm, then gently open the heating cylinder, place the tripod and the sample pan.
.3 KaiTi, KaiTi_, 3. Connect the power and turn it on, the instrument starts self-test, and then displays., and the temperature display window displays the initial value
.3 KaiTi, KaiTi_, 4. Hold the gram weight Place the weight in grams on the sample tray, and the weighing display of the instrument will display. (positive and negative errors in milligrams are normal). If the weight is placed in the sample tray, the weighing display will exceed the error. At this time, the instrument needs to be calibrated. Calibration Method: Press the calibration button, and the meter will display the gram weight on the weighing pan. It will take about ten seconds until the meter displays the weight (., plus or minus milligrams are normal), and the calibration is completed.
.3 KaiTi, KaiTi_, 5. Set the weight of the test sample to 3, then press rr (save initial weight),
.3 KaiTi, KaiTi_, 6. Pick up the bracket and shake it evenly. Close the heating cylinder and after the weight is stable, press the test button. The heating light will turn on and the instrument will be tested.
.3 KaiTi, KaiTi_, 7. During the process of measuring moisture, it is normal for the value displayed in the temperature window to jump up and down.
.3 KaiTi, KaiTi_, 8. After the moisture measurement is completed, the instrument automatically stops heating and sounds an alarm. The moisture value is locked and displayed in the data window. Write down the moisture value if you want to observe other data at this time. , you can press the display key to view them one by one. (If a printer is connected, you can directly press the print button to print out the moisture value)
.3 italics, italics_, 9. Lift up the heating cylinder, use the bracket to take out the weighing pan, and use the spare weighing pan to put it on the weighing On the stand, press the zero key to make the instrument display zero. The test is completed, waiting for the next test.
.3 KaiTi, KaiTi_, Remarks:
.3 KaiTi, KaiTi_, To avoid damage to the weighing system of the instrument, please protect the weighing system from the bottom when moving or transporting the instrument. Tighten the screws. If the instrument will not be used for a long time, please close the small compartment door on the right and package it with packaging materials to avoid damage.
.3 KaiTi, KaiTi_, Guanya-Corn Moisture Meter Warranty Method:
.3 KaiTi, KaiTi_, Our company's products have a one-year warranty. During the warranty period, no matter what part is damaged, All are provided free of charge by Guanya Moisture Meter and provide free services. Lifelong tracking service. For equipment that exceeds the one-year warranty period, only the cost of the parts will be charged for the replacement of damaged parts, and the service will be free of charge. If users encounter various operational and technical problems during use, they can contact Shenzhen Guanya Company promptly by phone, fax or - at any time. Guanya moisture meter staff will provide enthusiastic and thoughtful services Answer for you!
KaiTi, KaiTi_,