Endo ENDO elevator has excellent quality and low price

Endo hoist has excellent quality and low price
Floating mode
You can directly press the button (picture) on the left side of the handle to start the floating mode. If you are new to float mode, here is a simple example to practice with.
) Hold the handle handle and lift an object weighing at least 1 kilogram to an appropriate height in front of you.
B) Release the handle handle.
) Press the left button on the handle. It is recommended not to touch heavy objects with your hands at this time. Applying upward or downward force to the handle or weight while activating float mode can give false signals to the device, causing excessive float excursion.
) After the float mode initialization is completed, the blue light will light up and the handle with the load will not move. will be displayed (running floating mode).
)Now, hold the weight.
) To move a weight to a lower location, apply downward vertical pressure on the weight. To move a weight to a higher location, apply a vertical upward pull on the weight. Note: The direction and speed of travel at this time are controlled by the force applied directly to the weight by the operator. The greater the force applied to the weight, the faster the device moves. The overspeed detection routine will check whether the maximum full load lifting speed in float mode is reached and shut down the unit when reached. This safely limits the maximum walking speed in float mode.
) Run the device up and down several times (at least once in each direction) to ensure correct operation. Float mode provides smooth operation. NOTE: Triggering the operator position switch while in float mode will cause the unit to exit float mode. )Repeat this exercise until you are familiar with float patterns. Note: In floating mode, the load weight cannot be increased or decreased, otherwise it will cause unnecessary automatic movement of the equipment. Float mode must be restarted after each change in load weight.