Year1
- 外廓尺寸：
- 600mmx230mmx260mm
-
Universal drilling machine, three-hole universal rail drilling machine
China's railways have a history of more than a hundred years. Over the past hundred years, the means of railway track maintenance have evolved with the The rapid development of my country's railways is also changing with each passing day. From the initial purely manual maintenance to small machinery to large machinery, it can also be said that the history of China's railway road maintenance methods is a microcosm of the history of my country's railway development. Jining Hengwang Industrial and Mining Machinery Co., Ltd. is also constantly updating its products and improving its services under the trend of railway science and technology development. If you have any questions, you can call: at any time, Xiao Zhang will answer you!
※Product introduction:
Drilling range Ф3. Power is
3
Spindle speed r/. Installation time is. Unloading time is
Drilling The hole time is, the time for drilling three consecutive holes -. The stroke is not less than
Aperture deviation
Aperture roughness. Above
The first hole and the rail End face distance error., error between three holes., distance error between the three holes and the bottom surface respectively.
Outline dimensions
Unit weight
Drill bit hollow drill bit
3
Generally used for rails, especially suitable for rails
1. Scope of application
-Type III electric rail drilling machine is an ideal rail drilling tool for railway engineering, bridge, line overhaul and other departments. It is suitable for railway laying, line maintenance and emergency repair, especially drilling operations in areas and areas with power and electricity. Can be applied to various specifications of rails
2. Features of general drilling machine
This machine uses a micro motor.
This machine adopts a continuous wheel transmission method and uses a universal drill bit to maximize the cutting power. Fast speed, high efficiency and low noise.
3
This machine has advanced design, reasonable structure, convenient maintenance, small size and light weight.
The clamping rail part of this machine adopts two sets of four-link clamping mechanisms, which are flexible in loading and unloading, firm and reliable in clamping, and work smoothly.
This machine uses profiling blocks for positioning. The corresponding profiling positioning blocks (locating blocks attached to the machine) can be replaced for various types of rails, so the positioning is accurate.
There are two sets of devices on the left side of the machine. The outer device is a hole-fixing device and the inner device is a rail-fixing device. The inner device is equipped with a large cylinder and a small cylinder for drilling holes on the rails. At this time, the first hole can be drilled by placing the large cylinder close to the rail end. After drilling, insert the outer positioning pin into the first hole and tighten it, and then the second hole can be drilled and three holes can be drilled in sequence.
When drilling holes on the rail, place the small cylinder close to the rail end. The drilling method is the same as above. If the drill hole is not at the rail end, press the inner positioning pin to position the positioning block randomly.
3. - Universal drilling machine operating procedures
First check whether the power cord of the motor is broken or leaking. Turn on the power of the motor and observe whether it operates normally without load for half a minute.
Choose a positioning block of the same type as the rail being drilled, and install it at the corresponding position on the drilling machine fixture.
Turn the feed handle counterclockwise, first retract the spindle to the end, and then install the hollow drill bit into the front end of the spindle.
During operation:
Place the clamp on the top surface of the rail, adjust the appropriate length of the jackscrew, and press down on the handle of the clamp to lock. If the locking strength is not enough, turn the jackscrew handle clockwise until it is locked.
Turn on the power of the motor and let it idle for 3 seconds. When the motor runs smoothly and there are no abnormalities, turn the handle clockwise. When the drill bit enters the turning state, water is injected for cooling. To prevent the drill bit from burning blue.
After drilling through, stop water injection, quickly turn the handle counterclockwise, retract the spindle to the final stop, and turn off the motor. Lift up the clamping tool's pressure handle, detach the entire machine from the track, and complete the operation.
※
Company introduction:
Jining Hengwang Industrial and Mining Machinery Co., Ltd. is located in the charming city of Jining, the hometown of Confucius and Mencius and the capital of canals. It borders the Oriental Holy City Qufu to the east and the historic Beijing and Hangzhou to the west. The Grand Canal borders Qilu Lingxiu Weishan Lake to the south and Mount Tai, the most famous of the five mountains, to the north. The company was established in 2001 with a registered capital of RMB 10,000 and currently has more than 100 employees. It specializes in operating rock drills, rock drills, shotcrete machines, support equipment, scraper accessories, rail equipment and other mining equipment and accessories according to market needs. The company adheres to the business philosophy of providing convenient services to customers, creating development opportunities for employees, and the entrepreneurial spirit of being enterprising and enjoying success. We warmly welcome new and old friends from all walks of life at home and abroad to negotiate trade, create great causes and create brilliance together.
※
Contact information:
Mobile:
Telephone:
Fax:
Manager: Zhang Shuang WeChat:
: Email: @
Website::3
※
After-sales service and delivery instructions
, Cost-effectiveness instructions:
Under the same product quality conditions, our company will not reduce performance or change product parts. Price, give the lowest and most realistic price. (Product production configuration can be carried out according to customer requirements)
Delivery instructions:
Delivery is based on the supply period. If there are special circumstances that require early delivery, our company will do so within a limited scope. We will organize personnel to increase productivity, implement production, installation, debugging, packaging and other processes, and strive to meet your company's requirements
Product delivery comes with instructions:
①Product manual and maintenance manual
②Product Certificate of conformity
③Instructions attached to purchased parts
④Wearing parts and their list (the source may vary depending on the model)
. After-sales service scope:
The product warranty period is one year. If the product has quality problems during the warranty period, our company will provide the fastest maintenance without any cost. If parts need to be replaced outside the warranty period, our company will only charge the cost
Track the product:
Our company will After the product is sold, there will be at least one technical return visit every month to track and record the use of the product so that any problems can be dealt with in a timely manner and strive to achieve customer satisfaction.
WhatsApp
