Shenzhen combined image level price combined image level accuracy

Combined image level
Combined image level
Uses a prism to amplify the vapor image in the level to improve
the accuracy of the reading. It uses a set of transmission mechanisms such as levers and micro-moving screws. to improve the sensitivity of the reading.
Product details
The combination level uses a prism to amplify the vapor in the level to improve the accuracy of the reading. It uses a set of transmission mechanisms such as levers and micro-moving screws. Improve the sensitivity of readings. Therefore, when the measured part is tilted by .mm/meter, it can be accurately read in the combined instrument. In the synthetic level, the level mainly plays the role of pointing to zero.
How to use the optical imaging level: Place the imaging level on the working surface to be inspected. If the two bubbles do not overlap due to the inclination of the inspected surface, turn the dial until the two bubbles overlap. , the reading can be obtained at this time. The actual inclination of the inspected piece.
The technical calculation can be performed through the following method
The actual inclination scale value is the distance between the fulcrum and the dial reading
For example: the dial reading is in grid. For this type of combined level instrument, the scale value and the fulcrum are The distance is a fixed value,
that is, the scale value is./The fulcrum distance is
Then: the actual inclination./
Technical requirements:
, combined image level
Working surface There should be no rust, bumps, scratches or other defects that would affect use.
The painted surface should be beautiful and should not have defects such as peeling paint or scratches. Other exposed non-working surfaces should not have obvious defects such as rust.
The micrometer screw should rotate smoothly without getting stuck or jumping.
When the micrometer screw rotates evenly, the bubbles should move smoothly in the level bubble without stagnation or beating.
Image level
Technical parameters:
. Dial division value: ./
. Maximum measuring range plus or minus: -/
. Indication value error plus or minus /Positive and negative within the range./
.Positive and negative within the entire measurement range./
.Working surface flatness deviation:
.Level grid value: ./ .Working surface size*
For details, please contact the sales department hotline of Botou Chengyi Precision Measuring Instrument Factory:-: