For sale motor test plate, T-slot test platform, shock absorber test bench, Yasheng Casting Industry

材质：

HT250

型号：

齐全

硬度：

HB200

Automobile engine test platform
Automotive engine test platform, power motor test platform, mechanical power platform, tensile platform Yasheng Company specializes in design and focus on casting
The main purpose of the automobile engine test platform motor workbench is It is used in power experiments of mechanical motor engines and has good plane stability and toughness. There are grooves and bolt holes on the surface, which can be used to fix experimental equipment.
Every time a load is applied to the center of the working surface of the test platform, the deflection of the plate should not exceed. During the test, the deflection value of each level plate should not exceed half of the flatness tolerance value of the level plate. Experimental platforms of various specifications, the concentrated load area in the center of the working surface, the applied rated load and the specific indicators of the allowable deflection value. When users choose a cast iron motor test bench motor workbench, they can choose the appropriate specifications based on the load-bearing and requirements of the platform itself.
The technical data of the motor test platform is manufactured according to B/ standard. The working surface is machined with grooves and can also have bolt holes. The surface is manually scraped and ground to ensure plane accuracy. Remove the molding sand from the non-processed surface and apply anti-rust paint.
In order to ensure the plane accuracy of the motor test platform, most test platform manufacturers adopt a manual scraping and grinding process. Although manual scraping and grinding takes a long time, for the motor experimental platform, when the accuracy requirements are relatively high, it is a processing technology that cannot be replaced by any mechanical processing. In order to improve the service life of the experimental platform and ensure its working accuracy, it is recommended to control the scraping depth above. This can ensure a long service life and calibration cycle of the experimental platform. According to the relevant information on the scraping depth and the scraping depth measurement data, the processing requirements of this process can be achieved.
There are holes or grooves on the cast iron motor test bench, which are used to fix the workpiece, clean the iron filings generated during processing, or place fixing pins. It can also be designed as a flat surface. The test platform is made of high-strength cast iron workbench with a general hardness of A, and its hardness is preferably above B. The accuracy of the test platform is divided into four levels, and it is manufactured according to the national B/standard. The cast iron motor test bench is mainly used for power experiments mainly on mechanical motor engines. Specifications are divided into. Larger than this specification can be spliced. Learn more about automobile engine test platforms and purchase consultation