Shanxi bandwidth 800 electro-hydraulic plow unloader

Shanxi Bandwidth
Electro-hydraulic plow unloader
Self-esteem is not a slight, self-confidence is not complacency, and independence is not isolation.
Xu Teli
To ensure quality, management is indispensable To achieve high quality, management must be better.
[Reason for recommendation]: Simple, easy to implement, economical and practical, affordable, the best choice.
[After-sales maintenance]: One-year warranty, lifetime maintenance
Product name: Unloader/Plow unloader/Coal plow/Electric (hydraulic) vertical unloader/Single and double sides Unloader
Material composition: electro-hydraulic push rod (electric push rod), plowshare, roller, etc.
Model: produced according to the caliber required by the customer.
Production standards: enterprise and industry standards
Place of production: Industrial Park, Rencheng District, Jining, Shandong
Manufacturer: Shandong Jining Guolong (Group) Co., Ltd.
Storage/usage environment: avoid high temperatures , Avoid acid and alkali, suitable humidity
, Overview
This product is widely used for segmented unloading of conveyors in mining, metallurgy, electric fields, coal yards, container terminals, ports and terminals, etc. The hydraulic plow unloader is a mechanical product installed on the middle frame of the belt conveyor to perform unloading and control the flow and direction of material transportation. It can evenly and continuously unload the transported materials into the hopper or the required place. This unloader adds a variable groove angle, an auxiliary plow, etc., and uses an electro-hydraulic push rod as the power source, which overcomes the problem of the old unloader's incomplete plowing, tape scraping, and poor overload capacity that often burns out the motor and tops off the load. Disadvantages such as bent screw and easy damage to the machine.
, Working Principle
The single- and double-sided wear-resistant plow unloader uses an electro-hydraulic push rod as the power source. When working, the driving rod is extended through the push rod to drive the frame forward to complete the machine head. Drop down and support the flat roller group to make the working surface of the tape straight, and the lower edge of the machine head is closely attached to the surface of the tape. Write the material on the tape into the bucket and send it to the required place. After the unloading is completed, start the electro-hydraulic Push the rod and retract the driving rod, driving the frame to retreat, lift the plow head, and the variable roller group changes from parallel to trough shape to allow the material to pass smoothly.
Description:
The power source driving part is the latest domestic flashlight dual-purpose hydraulic electro-hydraulic push rod, which overcomes the shortcomings of electric push rods (poor overload capacity, burning motor, screw top bending) and It is stuck and maintains the advantages of the electric push rod (no leakage, self-aligning), and realizes the lifting and lowering of the plowshare by controlling the forward and reverse rotation of the motor.
The plowshare part is divided into a front part (made of alloy chromium manganese or asbestos) and a rear part (wear-resistant rubber plate) to make the discharge cleaner.
The added cable tightening device of the plowshare is a mechanical tightening type, which can adjust the height of the plowshare to insert the tape with the best surface. The plowshare will not be affected by the impact of coal during operation. Lifting or shaking prevents the tape from being torn, worn and leaking.
The electro-hydraulic push rod of the driving part has two installation forms: the electro-hydraulic push rod is placed on the upper part of the coal separator; the electro-hydraulic push rod is placed on the left or right side of the coal separator, which greatly facilitates the user .
The flap of the special air-locked funnel for the unloader is made of high chromium manganese wear-resistant material: it extends the service life to 10 years, reduces the amount of maintenance, reduces the induced blast, reduces it to the original level, and makes the material uniform. Prevent running and sticking materials and spreading materials along the way.
Mobile phone:
Contact person: Manager Lin
:
Telephone number: