Non-standard cast aluminum heating plate

non-standard cast aluminum heating plate customized according to customer requirements. The liquid is placed in the plate and is used for evaporation after heating. Diameter:
Total thickness:
Voltage:
Power:
[Usage Precautions]
The metal casting heater should be positioned and fixed, and the effective heating area must be in line with the The heating element must be tightly attached, and empty heating is strictly prohibited.
The working voltage shall not exceed the rated value, the relative humidity of the air shall not exceed the rated value, and there shall be no explosive or corrosive gases.
The metal casting heater should be placed in a dry place. If the insulation resistance is lower than the insulation resistance due to long-term storage, it can be baked in an oven at about 100 degrees Celsius for an hour to return to normal. Or reduce the voltage and apply electricity until the insulation resistance is restored.
The wiring part should be placed outside the heating layer and insulation layer. The shell should be effectively grounded to avoid contact with corrosive, explosive media and moisture. The lead wire should be able to withstand the temperature and heating load of the wiring part for a long time. When tightening the wiring screws Excessive force should be avoided