Minglan film Minglan film

剥离强度：

≥28N/25mm

基材：

PET膜

厚度：

0.12±0.01mm

Brand: Desco
Model: Various
Substrate:
1. Main technical properties:
. Adhesion performance test: easy to stick to the surface of objects, no Residual glue left:
. Follows the bending of the object, does not break or fall off
b. After peeling off the Zipberg cable test of the paint film, no residual glue is left on the surface of the paint film
.Load Test: After withstanding a load of 3-degrees, no traces of glue will remain on the surface after peeling off
. UV aging resistance test: Under the conditions of 3 degrees, there will be no cracking or deformation after being irradiated by 3 ultraviolet lamps, and no traces will remain on the surface after being peeled off.
. Humidity and heat aging test: no falling off after temperature +, no residual glue left after peeling off, no corrosion on the surface
2. Pasting requirements: the surface to be pasted must be free of dust and oil
3. Main technical parameters:
.Viscosity: medium viscosity - Base material: polyethylene - Thickness: .3 - Peel strength: Tensile strength: - Elongation at break: - Temperature resistance: less than or equal to 1 degree
.High viscosity - Base material: polyethylene - Thickness: .3 - Peel strength: Tensile strength: - Elongation at break: - Temperature resistance: less than or equal to 1 degree
. Viscosity: Extra high viscosity - Base material: Polyethylene - Thickness: .3 - Peel strength: .3 - Tensile strength: - Elongation at break: - Temperature resistance: less than or equal to 1 degree