Year1
- DF800：
- 浅黄色粉末
Gas generation: -
Decomposition temperature: ℃
Heating loss: .3
Ash content:
No odor , but smells of formaldehyde under humid conditions. This product is flammable and will easily react and burn when in contact with acid or acid mist.
During foaming, some additives are usually added to reduce the decomposition temperature of the foaming agent so that it can generate gas within a - range. The foaming agent will release a lot of heat when it decomposes, so it needs to be handled with care when used in thick products.
Applicable processes: rubber extrusion, molding, blow molding, film lamination
Applicable products: natural rubber, styrene-butadiene rubber, no discoloration, no pollution. In addition, foaming agents are also widely used in plasticizing lamination and blow molding foaming.
Adding amount: Rubber dosage is 3-, in plastic it is -.
Storage: The foaming agent should be placed in a ventilated and dry place, away from heat sources and open flames, away from direct sunlight, and away from contact with acidic substances. Processing areas should be well ventilated to avoid inhalation of dust and prolonged skin contact. When burning, a large amount of heat is released. When a fire occurs, a large amount of water must be used to extinguish the fire. Manual fire extinguishing is prohibited.
WhatsApp
