SW2700 railway three-color flashlight signal light SW2700

Railway three-color flashlight signal flashlight is suitable for railways, shipping and other transportation industries and some special industries. It can be used as signal instructions, safety warnings and work lighting
. Two of the three-color signal light sources of red, yellow and green can be selected. This configuration is a long-lasting signal, with a continuous working time of more than 1 hour and a visual distance of more than 1 meter.
.The head and tail of the lamp are respectively equipped with white lighting sources and warning light sources, which can not only provide hourly mobile working lighting or emergency lighting for various work sites, but also issue warnings behind you during work to eliminate dangers or hidden dangers. .
3. Adopt new solid-state light source, which is efficient and long-lasting, low energy consumption, reliable and durable, and can meet the working needs of various environments and conditions. High-energy memoryless battery has good charge and discharge performance, high capacity, low self-discharge rate, economical and environmentally friendly .
.Using the programming control circuit, the two signal light sources and the signal and lighting can be switched at will without any interval, and have an interlocking function. The push-button switch is simple to operate and convenient to switch.
.The special circuit design has a discharge protection function, which can prevent the battery from over-discharging and ensure that the circuit will not suffer from short circuit and other faults. The intelligent charger is equipped with overcharge, short circuit protection and charging display device.
.It has beautiful appearance, compact structure, small size and light weight. It can be handheld, hung on the waist, carried in a pocket or hung on the body with a tether, making it easy to carry.

Rated voltage - :r
3
Color - :r
Red, green, white
Protection level - :r
Rated capacity - :r
Light source type - :r
Light source life - :r
Ten thousand hours
Light source power - :r
Continuous discharge time - :r
Strong light - :r
Working light - :r
Charging time - :r
Battery life - :r
Cycles
Dimensions - :r
Weight - :r
.
When in use, press the black button in the middle of the lamp head, the illumination will be bright, press it again and it will turn off. Press the red button on the right side, the red signal will light up. Press it again and press the green button on the left side. or yellow button, the green or yellow signal lights up, and the light goes out when pressed again. You can switch between the two signal modes at will without any interval. Press the black button on the tail cover, the warning light lights up, and goes out when pressed again.
When charging, you only need to pull out the rubber protective plug of the charging socket on the tail cover, and insert the output plug of the charger into the charging hole to charge. The charger has a built-in charging protection device. When the charger is powered on, it will not charge. When charging, the indicator light is red. When the lamp is connected and charging begins, the indicator light is green, indicating normal charging. When the battery is fully charged, the indicator light turns red.
After being fully charged, it can be used at any time within 3 months. If left unused for a long time, it should be charged for ~ hours before use.
During use, when the battery is about to run out, the lighting brightness of the lamp will weaken sharply or suddenly stop working. At this time, you should stop using it and charge it or replace it with a spare battery.
When carrying or transporting, ensure that the button switch is protected from foreign objects to avoid power consumption.
When charging or continuously discharging in a place with a high ambient temperature, the temperature of the lamp barrel will rise slightly, which is normal.
It can only be charged with the special charger provided by our company and left unused for a long time. It should be recharged every three months.
Do not replace the light source or disassemble the structural parts and seals of the lamp at will.
. Wipe the surface after use in corrosive environments.
The company has passed: international quality system audit certification. This product is produced in strict compliance with international quality management system standards to ensure that product quality fully meets national standards and design requirements. The product has a 3-year warranty (one year for the light source). Within 3 years from the date of purchase, if any failure occurs under normal use of the product, our company will be responsible for free maintenance.
Sales hotline:
WeChat ID:
Online contact:
Railway three-color flashlight signal light signal flashlight