Back-attached rubber waterstop price, external-attached rubber waterstop manufacturer

r > 寰? Jiangban 呴粦 b (,, (,,,> Classification of external rubber waterstops
寰? 江撴洴粦><
b (,, r > b (,, (,, (,,> According to material selection, it can be divided into external rubber waterstop, external plastic waterstop, external plastic waterstop joint and buried water-swellable waterstop. etc. From the structural form, it can be divided into two types: < B-type waterstop and < type waterstop. It is worth noting that since the externally attached waterstop is set on the front surface of the concrete, waterproofing is often required during the construction process. The board is welded and sealed, so in this case, an externally attached waterstop with the same material as the waterproof board should be selected (such as < waterproof board selection < externally attached waterstop. In addition, after the externally attached waterstop is used, When backfilling the outside of the concrete siding, attention should be paid to the protection of the externally attached waterstop.
b (,, (,, (,,,>
b (,, r > 寰? Jiangban Xiali b (,, (,,>Externally-attached rubber waterstop
Huan? Jiangban Xiali><
b (,, r > b (,, (,, (,,>Externally-attached rubber waterstop) Price of external waterstop Specifications Common specifications of external waterstop< ***This waterstop material has good elasticity, wear resistance, aging resistance and tear resistance, strong adaptability to deformation, good waterproof performance, and wide temperature range. is < ℃ < + ℃. When the temperature exceeds < ℃, and when the rubber waterstop is subject to strong oxidation or corrosion by organic solvents such as oil, the rubber waterstop shall not be used.
b (,, ( ,, (,,,>
b (,, r > 寰? Jiangban紴粦 b (,, (,,,>Function and principle
寰? Jiangban崴粦><
b (,, r > b (,, (,,, (,,>External rubber waterstop uses the high elasticity of rubber to produce elastic deformation under various loads, thereby providing a solid seal and effectively preventing construction The structure leaks, seeps and plays a shock-absorbing and buffering role. In many engineering and building designs, there are certain telescopic requirements between civil water and soil structures, and there are problems such as waterproofing and shockproofing. Therefore, the use and installation of rubber waterstops is effective A means to solve the above problems. This product is mainly used for basic engineering underground facilities, tunnels, culverts, water conveyance, aqueducts, retaining dams, etc. that are installed in construction joints and deformation joints when concrete is cast in place and integrated with the concrete structure to ensure the service life of the project. . During the installation of the rubber waterstop, if it is found that part or all of the concrete is buried in the concrete during the pouring process, and there are many sharp stones and sharp steel heads in the concrete, due to the tear strength of plastic and rubber than the tensile strength Strength is lower than < times. Once the waterstop is punctured or torn, the crack will expand without a large external force. Therefore, during the positioning of the waterstop and the pouring of concrete, attention should be paid to the positioning method and pouring pressure. To prevent the water stop from being punctured.
b (,, (,,, (,,>
> (,,
Bold type (,, >Company phone number Manager Wan
(,,
(,,
(,,
><
> ><
> ><