Year1
- 运输：
- 物流
- 材质：
- 金属
- 色彩搭配：
- 定制
, * Unlocking and opening the door of the independent cabinet with rotating door: the upper and lower keys must be inserted into the keyhole and rotate clockwise (if you feel the rotation force, you can use
Use the other hand to press the aluminum profile on the unlocking side slightly, and at the same time turn the key) and pull it out slightly. If you can't feel the force of the locked cabinet, it means the lock has been opened. At this time, you can use the hand to pull the glass edge of the door lock hole to rotate the door open. According to the size of the cultural relics, the door can be opened to any size.
Close the door and lock it: After placing the cultural relics, you can push the glass door on the side of the door by hand and rotate it to contact the fixed glass side sealing strip. At this time, the upper and lower locks can be locked separately. When locking, be sure to press the aluminum profile with one hand slightly to make it closely contact the aluminum profile on the fixed side. At the same time, use the other hand to turn the key counterclockwise. The key will automatically pop out after it is turned in place.
Closing, please note that when the glass cover is about to be closed in place, hold your hand as close to the outside of the aluminum profile as possible without touching your fingers. (It is not allowed to press down the glass cover violently or quickly to prevent the glass from cracking.) After the glass cover is closed in place, press the lock bodies on both sides inward. A click sound is heard to indicate that the lock has been locked. close. (If the lock press is blocked, press down the locking side glass cover with a little force) Be sure to lock it in place, otherwise the lock
may pop out automatically.
, Low flat cabinet with horizontal sliding door:
Unlocking and opening the door: Both left and right keys must be inserted into the keyhole and rotate clockwise (if you feel the rotation force, you can use the other hand Press the aluminum profile on the unlocking side with a little force, and at the same time turn the key) and pull it out slightly. If you can't feel the force of the locked cabinet, it means the lock has been opened. At this time, you can pull the key by hand, or pull the aluminum profile outwards to the left and right (left and right should be pulled out with force at the same time), and then the glass door can be slowly and uniformly moved to the left (or right) according to the needs of placing cultural relics. (When moving the glass door, keep a certain distance between the bottom aluminum profile and the fixed side of the cabinet to avoid movement obstruction.) At this time, pay attention to the removed glass not to collide with nearby objects and people. (It is not allowed to move the glass door violently or quickly to avoid danger.) The glass door moves to the left (or right) to the limit and stops.
Close and lock the door: You can pull or push the glass door back to a position that is approximately aligned with the fixed glass on the left and right sides (note: when moving the glass door, also keep the aluminum profile at the bottom of the door in line with the fixed side
distance) At this time, the bottom of the door can be pushed toward the cabinet (the left and right sides of the door should be pushed in at the same time). When the aluminum profile at the bottom of the door contacts the fixed aluminum profile on the side, hold it down with one hand and turn the key counterclockwise with the other hand. The key will pop out automatically when it is in place. Just lock the two keys separately.
Open the door to the low flat cabinet:
Unlock and open the door: Before unlocking, check that the back side of the display cabinet is at a left and right distance from the fixed object so that there is room for the upper body of the display cabinet to turn over. Insert the key into the left and right lock holes respectively, turn it and pull it out at the same time. At this time, the lock body can be ejected and taken out to the left and right. (If the ejection of the lock body is blocked, you can use your hands to press down on the unlocked side display cabinet, and the lock body will pop out.) After the left and right locks are all unlocked, you can use your hands to lift the front aluminum profile to open the display cabinet. The upper glass cover is flipped, and the gas spring will automatically lift the cabinet into position. (When the upward stroke of the glass cover is more than half way, you should change to pull the glass cover downward with a little force to prevent the air support from lifting the glass cover too quickly and turning over the display cabinet, which is dangerous.)
Close the door and close the glass cover. Lock: After the cultural relics are placed in place and the spotlight rotation is adjusted to meet the requirements, you can use your hands to evenly press down on the glass cover on the opening side. After the stroke is halfway through, you should switch to lifting the glass cover with a little force
so that the glass cover can be gently lifted. Close, note that when the glass cover is about to be closed in place, hold your hand as close to the outside of the aluminum profile as possible without touching your fingers. (It is not allowed to press down the glass cover violently or quickly to prevent the glass from cracking.) After the glass cover is closed in place, press the lock bodies on both sides inward. A click sound is heard to indicate that the lock has been locked. . (If the lock is blocked from pressing in, you can press down the locking side glass cover with a little force)
Be sure to lock it in place, otherwise the lock may pop out automatically.
, Flip and flip the overhang cabinet:
Unlock and open the door: After inserting the left and right keys into the key holes and rotating them in place, the upper part of the overhang cabinet can be flipped forward and lifted up.
Close the door and lock it: After the cultural relics are placed, the upper part of the cantilever cabinet flips down and returns to its original position. The two locks are rotated to the automatic ejection position.
2. Precautions for maintenance and replacement of lighting fixtures:
Showcase: The angle of the spotlight can be adjusted arbitrarily according to the placement of cultural relics. If the spotlight does not light up, you should first check the wiring condition to ensure that there is no problem with the wiring. You can replace the transformer first
(When replacing the transformer, be careful to use a matching transformer, and do not use the wrong one.) If it still cannot recover after replacing the transformer, check the spotlights on this group of lights one by one to eliminate damaged ones. Finally, the spotlights must be connected in series with the transformer.
3. Daily cleaning and maintenance of the cabinet surface and glass:
Daily cleaning of the cabinet (steel plate and aluminum profile) surface: Use a slightly damp soft rag to wipe the loose soil and stains on the surface. After wiping, the surface should be Keep it dry and not too humid to prevent metal corrosion on the surface of the steel plate spray
.
. Glass surface: You can wipe it with a soft-bristled rag dipped in special glass cleaner and then wipe it with a dry newspaper. Note: Do not spray a large amount of glass cleaner directly onto the glass surface and flow onto the metal of the bottom box, nor allow the liquid to stay on the shadowless glue at the glass seam for a long time. (Shadowless glue is prone to failure when exposed to liquid for a long time, causing the glass to crack). If there is any failure or cracking at the joint of the shadowless adhesive, please notify the manufacturer in time to repair the adhesive.
Company address: Shengyuan Henghui Technology, Museum Showcase Base, Shibalidian Township, Chaoyang District, Beijing
Mobile Phone Manager Su
@.
Telephone: -
WhatsApp
