Precautions for baking paint display cabinets

运输：

物流

材质：

金属

工艺：

机加工

Display cabinets processed with baking paint technology are called baking display cabinets. The glossy paint display cabinet is better than the glossy one. It is not easy to change color and is easy to clean. You can usually wipe it with a semi-wet towel. If there are stains that cannot be wiped off, you can use washing powder or toothpaste to scrub it. It is not easy to clean. It carries the color, and it is still as bright as new after wiping. If you do not want a matte display cabinet, use a small brush to clean it when it is dirty, because there are pits on the surface and it is difficult for dust to accumulate inside. The paint display cabinets are rich in color and can be made into various shapes. The display cabinets produced by Beijing Shengyuan Henghui are very good at displaying the characteristics of the display cabinets and the brand image of the products. Main construction technology
Varnish construction technology Clean the wooden structure surface of the counter showcase rrr polish with sandpaper rrr moisten with powder rrr polish with sandpaper rrr fully scrape the first putty, polish with sandpaper rrr fully scrape the second putty, fine Sanding rrr, apply oil color rrr spray the first coat of paint rrr find the color to repair the putty, polish with fine sandpaper rrr spray the second coat of paint, polish with fine sandpaper rrr spray the third coat of paint, dry in the air drying room, Polish with rrr water sandpaper, wax, and polish.
The construction process of mixed color paint first cleans the dust and wooden burrs on the base surface of the counter and display cabinet, repairs the base rrr and smoothes the wooden surface with matte paper rrr applies paint chips on the knots rrr primer and putty rrr applies dry oil rrr the first time Full putty rrr Polished rrr Apply the base coat rrr The base coat is dry and hard rrr Apply the top layer rrr Apply the putty again for repair rrr Polish and wipe the third coat, apply the second coat of topcoat rrr Polish rrr the third Topcoat rrr polished and waxed.
Construction points
Construction specifications for varnish spraying: Grinding the base is an important process for spraying varnish. Dust, oil, sawdust and other impurities on the wooden surface of the counter display cabinet should first be removed. Applying oil powder is also an important step in varnish painting. During construction, dip cotton silk in oil powder and apply it on the surface of the wood of the counter display cabinet. Rub it back and forth with your hands to rub the oil powder into the holes of the wood. When spraying clear oil, hold the spray gun in a relaxed and natural manner, apply gentle pressure with your fingers, and ensure that it does not loosen or shake when moving. ,,,,,,,,,3 When spraying, please follow the requirements of first dipping oil in more oil, less oil each time, operating frequently, and in the same direction. Follow the requirements of first up and then down, first difficult and then easy, first left and then right. , the order of first inside and then outside and the operation method of horizontal spraying and vertical spraying.
Construction specifications for oil-contaminated wooden showcases. When treating the base layer, in addition to cleaning the surface debris of the base layer, local putty embedding should be carried out. When sandpapering, the surface should be sanded along the wood grain. Before painting the surface layer, use paint chips (shellac paint) to seal the knots with large color differences and wood resin. Dry oil or cleaning should be applied to the base layer. When spraying the dry oil layer, all parts should be sprayed evenly without leakage. After the base oil is completely dry, apply the first coat of putty. After drying, sand it with manual sandpaper, and then top up with high-strength putty. The putty will not fall when you pick it up. When spraying the top layer of paint, it should be sanded with fine sandpaper first.
Notes
The base treatment should be carried out according to the display cabinet processing requirements, because the painted display cabinets have a variety of effects, such as matt/semi-matt/bright/open, etc. to ensure the processing effect and achieve surface paint spraying and design. The effect arrives.
Before spraying, the surrounding environment should be cleaned to prevent dust from flying and maintain a clean spraying environment.
Because paints are toxic to a certain extent and have a strong irritating effect on the human body and respiratory tract, attention must be paid to ventilation and self-protection during construction.
Company address: Shengyuan Henghui Technology, Museum Showcase Base, Shibalidian Township, Chaoyang District, Beijing
Mobile Phone Manager Su
@.

Telephone: -
/3/Jiaozuo Museum-