Hand-held four-disk 12-head grinder old epoxy floor renovation machine hardened floor grinding and polishing machine

Four-disc and twelve-head grinding machine
(hardener floor grinding head, penetrant polishing head, hardened floor polishing machine)
Scope of product application: stone renovation, floor shear leveling, mixing Soil penetrant, hardener grinding treatment, polishing, integrated, can be equipped with alloy tools for removal and polishing of large areas of old epoxy and old paint floors
Technical parameters (-Four-disc grinder)
Working width Horsepower (Siemens motor)
Motor power speed-
Weight of water tank
Number of discs grinding discs
Operating instructions

Installation of grinding discs, place the handle In a horizontal position, press down hard to tilt the chassis to expose the grinding disc, stick the grinding disc on it, and put the water retaining ring in place

Slowly put the machine back on the ground so that the grinding disc touches the ground. Handle with care)
3
Adjust the horizontal adjustment wheel appropriately to center the level instrument bubble.

Install the power cord. (Pay attention to safe operation)

Pull and release the height adjustment lever to move the handle to the appropriate operating position

Turn on the water and adjust the switch
Turn on the power switch and the machine starts to work
If you want to stop the machine or if there is any abnormality when the machine is stopped, press the safety switch to cut off the power supply.

During the grinding process, you should always pay attention to and check the level abnormality and the wear of the grinding disc. Do not wear it excessively to avoid damaging the grinding disc.
Jining Dingcheng Industrial and Mining Equipment Co., Ltd.
Contact person: Zhang Wenfeng
Mobile phone
WeChat:
Landline
Fax:
: