High transmittance sun room factory construction PC sun panel 10mm factory direct sales

Zhejiang Boya Building Materials Co., Ltd. has multiple production bases across the country. Its products include rock wool sandwich panels, color steel sandwich panels, machine-made asbestos tiles, R lighting tiles and other products. Among them, rock wool sandwich panels have the functions of thermal insulation, flame retardant and fire prevention, and are excellent building materials for the construction of large factories. Welcome to inquire, phone number 3. The solar panels produced by Zhejiang Boya Building Materials are mainly made of raw materials. In English, it is referred to as hollow board. Sunshine panels are produced with polycarbonate as the main raw material. The application of solar panels has just begun, and is mainly used in the construction of modern agricultural greenhouses. In our country, it is mainly used in some northern cities such as Beijing. In terms of greenhouse construction, there are greenhouses built entirely with solar panels, greenhouses built with solar panels on the gables, and greenhouses built with gables and side walls using solar panels. In terms of greenhouse functions, there are production-oriented greenhouses that focus on production, and some Sun panels are a widely used building material for commercial greenhouses, mainly flower trading centers, and greenhouses mainly for scientific research. They can also be used in sunshades and awnings.
Hollow panels, hollow solar panels, hollow solar tiles, honeycomb solar panels, type lock solar panels,
Single and double hook lock solar panels, solar panels. Sunshine panels are made of polycarbonate as the main raw material. Solar panels rapidly entered the building decoration materials market in the mid-1990s. Compared with laminated glass, wired glass, tempered glass, and insulating glass, it is more lightweight, weather-resistant, super strong, flame-retardant, and sound-insulating due to the unique high quality of solar panels. It has been widely recognized by the architectural design, decoration engineering, environmental engineering, and advertising industries.
It has excellent properties of light weight, weather resistance, super strength, flame retardant, and sound insulation, and has been widely recognized by the architectural design, decoration engineering, environmental engineering, and advertising industries. The sales volume of solar panels in the international market is growing at an annual rate. With the gradual upgrading of domestic buildings, product features
Light transmittance: The transmittance of solar panels is the highest and can be matched with glass. The coated board will not produce yellowing, atomization, or poor light transmission when exposed to sunlight. After ten years, the light transmission loss is only 0.0%, and the loss rate is as high as -0.0% for glass fiber.
Impact resistance: The impact strength is twice that of ordinary glass, three times that of an acrylic plate of the same thickness, and - three times that of tempered glass. There will be no cracks even if it is dropped from two meters below with a hammer. There are glass and steel that do not break. Good name.
Anti-UV: One side of the board is co-extruded with an anti-UV coating, and the other side has anti-condensation treatment, integrating the functions of anti-UV, heat insulation and anti-fog droplets. It can block the passage of ultraviolet rays and is suitable for protecting valuable artworks and exhibits from ultraviolet damage.
Light weight: The specific gravity is only half that of glass, saving the cost of transportation, handling, installation and supporting frames.
Flame retardant: National Standard B confirms that solar panels are flame retardant Class B. The ignition point of the board itself is ℃, and it will self-extinguish after being removed from the fire. It will not produce toxic gases when burning and will not contribute to the spread of the fire.
Flexibility: It can be cold-bent at the construction site according to the design drawings, and installed into arches, semi-circular roofs and windows. The minimum bending radius is times the thickness of the plate, and hot bending is also possible.
Sound insulation: The sound insulation effect of solar panels is obvious, and it has better sound insulation than glass and acrylic panels of the same thickness. Under the conditions of the same thickness
. Before installation, the frame must be smooth and smooth. Cleaning
. First check whether the cutting size and expansion allowance of the board are qualified. Pay special attention to leaving a sufficient and uniform expansion gap. The calculation formula is as follows:
The total expansion gap expansion coefficient is the largest before and after local installation. The length of the temperature difference board
The expansion coefficient is/
3. The thermal expansion and contraction coefficient of the board is different from that of the support frame, and a margin needs to be left to withstand wind pressure, snow pressure, etc., so the embedded amount must be fully reserved , and the space for thermal expansion and contraction. Generally, the edge of the board extends above the fixed frame and has at least two ribs. When installing, the thermal expansion and contraction of the fixed area generally leaves 3 gaps per meter
. Identify the UV-resistant side of the board surface and install it facing outward. , it is never allowed to install with the anti-UV side facing inward
. When installing the board, the protective film covered on the board will affect the combination of the caulking material and the board, so remove the protective film around the board before installation. Lift up~, do not let the protective film be clamped by the profile, but do not lift it too much to avoid damaging the board surface during operation
Note: Some workers clamp the protective film in the profile during operation, and then mark it with a sharp tool Lift it up again, but it often scratches the surface of the board and causes damage to the board
. When the hollow board is cold-bent and installed, its bending radius must not be less than times the thickness of the board
. The hollow board can only follow the direction of the ribs. Bend
. The inclined installation of the hollow plate should follow the direction of the ribs, which is conducive to the discharge of condensation water
. If self-tapping and self-drilling nails need to be directly fixed on the plate, the holes must be expanded, and the diameter of all drilled holes should be larger than the bolts. diameter, leaving a gap for thermal expansion and contraction. Therefore, when opening a hole in the material plate, the hole diameter must be larger than the screw diameter. Avoid locking the screws in the curved part to avoid cracking the board
. When tightening the self-tapping screws, the force must be even, ensuring The profile is truly compacted with sealing strips and panels
. All pores should be filled with neutral sealant, and the exposed parts should be coated with neutral sealant to prevent cleaning agents from penetrating into the edges and preventing delayed cracking when discovered When installation defects occur, sealant can be used to compensate for possible leakage. When choosing a sealant, choose a neutral weather-resistant silicone glue that remains soft, has low modulus, and has a maximum elongation after curing. Before applying the glue, the surface of the aluminum profile and plate must be clean and dry, and free of oil, dust, and water vapor. , dewdrops and other debris, the glue should be applied evenly, the surface of the glue layer should be smooth, the cross-sectional dimensions should be consistent and there should be no discontinuity. Special attention should be paid to the fact that the neutral sealant used must be tested for compatibility with the board in advance to avoid compatibility with the board. A chemical reaction occurs in the board
. The distance from the center of the hole to the edge of the board should be greater than or equal to
3. It is strictly prohibited to step on the surface during the entire process of board installation. A removable pedal across the board must be used during operation
.The cutting length of the board must be greater than the width before it can be bent
.The protective film must be removed immediately after the board is installed. If the board surface is required to be protected due to special construction requirements, the protective film must be removed first and then re-covered
.Self-inspection should be carried out after the panels are installed, especially the spray test should be done carefully to check whether there is water leakage. If there is any leakage hazard, it should be eliminated in time, and then the appearance quality should be checked
A large number of spot layer millimeter thick hollow solar panels/mm thick Rice-shaped solar panels/mm-mm thick honeycomb solar panels. -Millimeter-thick locking solar panels will be the leading product of solar panels in the future, with the advantage of being leak-proof
Millimeter-thick panels/polycarbonate panels/safety glass panels Patented product: connecting glue. . Meter wide transparent or blue mm thick - mm thick earthquake-resistant resin board!
.Three-layer solar panel performance and advantages: good light transmittance, strong weather resistance, strong flame retardancy, strong temperature resistance, etc.
.Three-layer solar panels Application fields of 1-layer solar panels: roofs of various buildings or crops/fruits and vegetables/breeding greenhouses, etc.
3. Three-layer solar panel models include millimeter, millimeter, millimeter, millimeter, etc. meters
. Three-layer solar panel installation It is as convenient as the installation of ordinary R lighting panels, but this product has better light transmittance and higher intensity. The yellowing rate after ten years is only 0.9%, which is almost negligible.
.Three-layer solar panels have good waterproofing effect and are easier to waterproof than endurance panels on the market. Endurance panels are all flat and must be pressed with pressure strips and tapes to prevent water leakage
: Three-layer rice-shaped panels Type solar panels are more robust
Zhejiang Boya Building Materials Co., Ltd. business contact information 3, welcome to call for consultation.