Year1
Product introduction
First of all, thank you for using our company's products! Please read this manual before use and use this product correctly.
For better service, the content of this user manual may be changed. Changes in product performance and functionality will be made without prior notice.
This product combines the functions of a camera and voice recorder into one. It is designed with anti-shake function for taking pictures, which is no less than a professional camera. The video recording will live up to your enthusiasm for shooting. The high-definition processing chip allows you to still record clear and smooth images in unstable environments. Massive storage, maximum B support, standard B standard interface, no driver installation required, fast and simple operation, video format, can be played on any video device. Since the product was launched, it has been supported and recognized by the majority of consumers.
2. Operating Instructions and Product Structure Diagram
<
Short press the power button to turn on the camera, and the camera will start system initialization (the red and blue lights will be on at this time. After the initialization is completed, the red light will go out and the blue light will turn on. On, it enters standby mode.
Camera mode: When the watch is turned off, press the power button and the double lights will turn on. After the system initialization is completed, the red light will go off and the blue light will stay on. At this time, the camera will enter standby mode. Short press Power button, the blue light flashes. In order to save power, it flashes three times in total and turns off. At this time, the camera has entered the recording process. During recording, short press the power button, the blue light is always on. At this time
Save the file and Stop recording and return to standby mode. In order to better save files, the recording saves a file every five minutes.
Note: In order to cycle the recording, please save the previous files that need to be saved to avoid being overwritten by subsequent files.
Photography mode
In standby mode, short press the photo button to take a photo. Each time you press the photo button, the blue light flashes once to take a photo and store it, and return to photo standby mode.
In the motion detection mode, in the standby state, long press the camera button to enter the motion detection camera. The two lights flash at the same time. In order to save power, they flash three times in total. The two lights go out. At this time, the camera has entered the motion detection camera. In the motion detection In the camera measurement
, when an object moves in the camera range, the camera will be started. When the object leaves the camera range, the camera will be stopped. Waiting for the next time a moving object appears, the camera will be turned on again, and the cycle will repeat. This greatly saves disk space.
Note that the recording is a loop recording, please save the previous files to avoid being overwritten by subsequent files.
Special instructions
One
Watch When taking pictures and recording, turn the movable knob switch on the top of the microphone cap counterclockwise to open the recording hole.
2
When the watch is waterproof, you cannot record.
Removable disk
Use the B extension cable equipped with this machine, first connect the B port of the machine, and then connect the other end to the B interface of your computer. At this time, the computer will pop up the removable disk logo. You can also find it in My Computer. The drive letter of the removable disk. When the machine is connected to the computer, the machine has started to work as a removable disk of the computer. You can easily view, transfer, copy and delete files through the computer. The image files of the machine are saved and recorded as disk *. Required When uninstalling the machine, please click the removable device icon on the taskbar in the lower right corner to uninstall the removable storage device. After the system confirms that the hardware can be safely unplugged, disconnect the machine from the computer.
Note that depending on computer configuration or system differences, the time for identifying removable disks will be slightly different. Please wait patiently. It is best not to operate the camera during this period to avoid affecting the computer recognition hardware. If the removable disk is not recognized for a long time , please try to re-insert it. If the hardware still cannot be recognized, please confirm that your operating system and driver B interface cable are normal. To avoid causing damage to the machine or computer, please connect strictly in accordance with the specifications. Uninstall the machine and connect When uninstalling, you must first connect the B extension cable that comes with the machine to the B port of the machine, and then connect it to the B port of the computer. When uninstalling, when prompted to safely remove the device from the system, first disconnect the B port of the computer, and then disconnect the B port of the computer. Turn on the B
computer network camera function connected to this machine
First, you must install the camera driver in the included CD on your computer. Put the included CD into your computer's CD-ROM drive and run the program in the CD to install the camera driver. After installing the camera driver, you can use your computer's camera. Press and hold the camera button, connect to the computer, and the machine enters r(webcam mode. In this mode, you can conveniently video chat with friends and take photos of photos, etc. Open the webcam screen and double-click My Computer to open the webcam ( Note: This machine must be connected to B in the powered-on state to enter the network camera function. In order to avoid damage to the machine or computer, please strictly follow the specifications to connect and uninstall the machine. When connecting, you must first connect the B port of the machine with the B extension cable that comes with it. , and then connect it to the B port on the computer. When uninstalling, when prompted to safely remove the device from the system, first disconnect B on the computer, and then disconnect B connected to the machine
Charging
Connect the computer B interface or charger to charge the camera. When the battery is charging, the red light flashes. When the battery is fully charged, the red light goes out. Note that the camera has a built-in high-capacity polymer lithium battery, which has no memory effect and can Charge as you go, but for the first five times of use, please charge the battery to saturation after use to activate the battery's maximum capacity and obtain standard working time. In order to maximize the battery's power storage capacity, please After the indicator light indicates that it is fully charged, continue charging for up to minutes. In order to avoid damage to the machine or the computer, please strictly follow the specifications to connect and uninstall the machine. When connecting, you must first connect the B port of the machine with the B extension cable that comes with it. , and then connect it to the charger's B port on the computer. When uninstalling, when prompted to safely remove the device from the system, first disconnect B on the charger or computer, and then disconnect B on the machine
Time modification
The camera provides the function of displaying the recording time in the video file. You can set the time according to actual needs. The time format is year, month, day, hour, minute and second. The setting method is as follows. Connect to the computer, find the removable disk, and then Right-click in the blank space and move the mouse to New Text Document on the pop-up menu. Give the document a name (the letters must be lowercase and its extension name). You can also create such a text document on your computer desktop as described above. The folder is then copied to the disk folder. Open the folder and set the time format, such as year, month, day and hours, minutes and seconds separated by spaces. Then save. After saving the file, safely exit the hardware, turn on the computer, and the time setting is completed. Time setting After that, the time of the video file will be the same as the time you set. Note that after the time is set, it must be turned on before it takes effect.
<
Three exception handling
When the camera storage space is insufficient, After the blue and red lights flash at the same time for about a second, the current image file will be automatically saved and the camera will shut down. If you want to continue to use the camera, back up the required image files on your computer and delete the old files in the memory to free up enough space. Storage space.
When the battery of the camera is insufficient, it will automatically save the current image file and shut down after the red light flashes about a few times. If you want to continue to use the camera, please charge it before use.
When it stops responding due to accidental improper operation or other special reasons, press the reset button to turn off the power, and then turn it back on before using it again.
If the battery cannot be turned on, please charge it. Press the reset button to turn off the power, and then turn it on again before using it.
If there are too many bad files on the non-recording memory card, please format the disk before using it.
If not connected to the computer, please confirm whether your operating system and driver B interface cable are normal.
Four Precautions
Please strictly abide by relevant national laws and regulations when using the product. Do not use this product for any illegal purpose, otherwise you will be responsible for the consequences.
Regarding the battery, the battery working time is shortened as the use time increases. If it has not been used for a long time, please fully charge it before use.
When the actual capacity of the player is slightly smaller than the nominal capacity, it is normal!
File Security This product is not a professional storage device and does not guarantee the integrity and security of internally stored files. Please immediately back up your important files on a computer or other storage device.
Recording quality This product is not a professional recording equipment, and there is no guarantee that the effect of the recorded files will meet your expectations.
Working temperature ℃
Working humidity, please do not place the product in a humid working environment. The product is not waterproof.
Please use the shooting illumination in an environment with sufficient lighting. Do not point the camera directly at the sun or other strong light sources to avoid damage to the optical components.
Cleaning requirements: Please do not use it in an environment with excessive dust density to prevent the lens and other parts from being contaminated with dust and affecting the camera effect. The lens can be gently wiped with lens paper or glasses cloth to keep it clean.
Other matters: This product is a precision electronic product. Please do not subject it to strong impact, vibration, and do not use it under strong magnetic fields or strong electric fields.
Please pay attention to environmental protection when disposing of it, and do not throw away this product at will. It is prohibited to throw this product into fire to avoid explosion
For additional information, please contact your local dealer for other unknown matters.
WhatsApp
